9033: Smart Instant Hot Water Recirculating System Pump 3 speed with Bulit-in Thermostat 18 inch Hose for Tanked, Tankless Water Heater

9033: Smart Instant Hot Water Recirculating System Pump 3 speed with Bulit-in Thermostat 18 inch Hose for Tanked, Tankless Water Heater Extremely Quiet HBS24-12 Brand: PROZRTED Color: Pump Material: Plastic Style: Modern Item Weight: 2.13 Kilograms Maximum Flow Rate: 6.1 Gallons Per Minute [NSF Certified for Safety] Our Smart Instant Hot Water Recirculating Pump is NSF certified, ensuring top safety and health standards. Trust our pump for reliable and health-conscious hot water solutions. [Smart Pump Features] Our pump offers three modes: Smart Mode for instant hot water, Energy-Saving Mode to lower temperature if unused, and Manual Mode to start a few minutes before use for maximum savings. The smart memory function remembers settings when powered off, and there are three adjustable speeds. [Compatibility] Our pump can work with both tankless and tanked water heaters. For super energy-saving applications, set the pump to “manual mode” and start it using the remote control. The pipe water will reach the set temperature in a few minutes, and the pump will shut off after 60 minutes. Starting the pump using the “HAND” button will not trigger the 60-minute extension. This approach extends the life of your water heater, saving gas and water. [Digital Motor] The 24V DC brushless motor ensures safety, power, and durability, operating quietly. The 12-inch hose has a 3/8-inch Compression x 1/2 inch FIP fitting(you can remove one cap to reveal the smaller fitting). Using this pump can save up to 10 percent on water bills by reducing waste. [Advanced Performance] The high-speed recirculating pump offers a flow rate of 6.1 GPM (366 GPH max) and a lift of 39.3 ft. It quickly heats water to the set temperature. The HBS24-12 model is designed for installation under the farthest faucet from the water heater in each loop. It features a lead-free copper pump body and connectors, ensuring safe drinking water and is maintenance-free. It includes a 10 ft cord and is easy to install. [Built-in Check Valve] The pump's default temperature settings are 38℃ off and 33℃ on. When the water temperature in the pump drops below 33℃ (91.4°F), it pushes the cold water back to the water heater. As the temperature hits 38℃ (100.4°F), the pump will automatically shut off. The remote controller, which is used to set higher or lower water temperatures (from 32℃ to 42℃), is not included and needs to be purchased separately. [Temperature Sensors] The pump has two advanced built-in high-accuracy temperature sensors: one to measure the pipe water temperature and the other to measure the pump's ambient air temperature. These features protect your pipes from freezing and make installation easier, saving you time. To avoid water leaks, ensure the plastic washers are not damaged and are installed correctly. The maximum liquid temperature is 158°F (70℃).