The Century wire feed 255 Flux-Cored/MIG wire feed welder is built for the professional! With a 30 to 255 amp output, it can handle a wide range of thicknesses using gas or gasless flux-cored. When using flux-cored process, you can weld up to 3/16” thick steel in one pass and up to 1/2” in multi-pass. Use .045 INNERSHIELD NR-212 wire for multi-pass. MIG up to 10 gauge or 3/16″ multi-pass. It welds aluminum and is spool gun ready. Unit includes 12’ MAGNUM 250L gun and cable assembly with .035 contact tip, 10 Ft. Work cable and clamp, .045 spare contact tip, MIG welding nozzle, Adjustable gas regulator and hose, Reel adapters for 2” and 3” wide 8” diameter spools, Accepts larger 33 lb. and 44 lb. spools of wire, Instruction manual, 10 Ft. Input cable with attached plug. Three-year warranty parts and labor, 90 days on gun and cable assembly. This unit is Spool Gun Ready. Built in thermal overload protection. Running gear with single cylinder rack integrated to base (maximum cylinder size 48”). Recommended Accessories In Stock Magnum 100SG Spool Gun for Aluminum Welding $260 WeldingMart is a Preferred Lincoln Electric Distributor. Message for Shipping Rate if Unable to Pickup from our Kaukauna, Wisconsin location.