MiG welder Lincoln SP 135 T

Comes with Magnum 100L mig gun, not included is the adjustable gas regulator or hose kit. Has ground clamp and cable, and mild steel mig wire. Just needs adjustable gas regulator and hose kit a cylinder and shielding gas for gas welding. This lightweight, compact 120V wire feeder/welder breezes through MIG welds on a wide range of materials including mild steel, stainless steel, and aluminum. It also handles flux-cored welds on mild steel with ease. It is currently set up to weld without shielding gas, Large easy to set knobs provide 4-position adjustable tap voltage control and continuous full-range control of wire feed speed. Welder settings reference chart conveniently located inside wire feed section door makes it easy to set the machine for mild steel welding jobs. Gun Trigger Safety feature keeps welding wire electrically "cold" until trigger is pressed. Adjustable break spindle accommodates both 8" diameter and 4" diameter spools of wire. Built-in "burnback" function virtually eliminates sticking in the weld puddle. Comes complete with comfortable 10 ft Magnum 100L Mig welding gun, built in gas valve, power cord with NEMA 5-15P plug for connection to standard 120 volt receptacles, 10 ft work cable with clamp, guide tubes and reversible drive roll, six spare.023/.025" contact tips, Processes: MIG (GMAW) and Flux cored (FCAW) Power: CV, DC, 1 phase, 60 Hz Material Thickness: Welds 24 gauge up to 3/16: with MIG and up to 5/16" with self shielded flux-cored wire. Applications: Maintenance, Construction, Auto Body, Farm/Ranch, Rental, Home. Rated Output at 20% Duty Cycle: 90 A at 19 VDC Current Range: 25-135 Amps Max. Open Circuit Voltage: 29V Wire Feed Speed: 50-300 IPM (inches per minute) Dimensions: H - 12in x W - 9.75in x D - 16.5in Net Weight: 47 lb this welder goes for $950 on Amazon.