Type

7.5hp 120gal single phase 230v

Brand

Champion

Set up for garage/home use w/ a 230v single phase 7.5hp baldor motor. This unit is basically Brand new; • New OEM ((pump retail is $1.8k)) Champion compressor pump. Has NOT been broken in yet as of 6/2/22 • brand new 38-40A magnetic starter w/ adjustable overload • Fully rblt Baldor L1510T 7.5hp single phase ac motor. New; oem (1) run & (2) start Capacitors. Also new oem cast iron capacitor box. Also installed in this motor; new SKF USA shielded deep groove bearings DE 6307z & the ODE 6306z. Fresh synthetic silicone grease was used on install. • 2 groove browning 8” sheave pulley 1.125” bore w/ (2) new Kevlar B-83 belts • New All brass check valve, McDanial ss gauges, push fit Milton fittings. Another good on Champion is that they have a factory coating on the inside of the tank that prevents excessive rust inside there. Also if you ever have to contact them they will go outta their way to help you if you have their equipment regardless where you bought it. Worked on a long discontinued r-7 from the 1940’s the champion rep dug me up an owners manual & info for east coast business still making parts for it! Was the most Exceptional customer service I’ve ever experienced •The Flow is 23cfm @ 175psi •120gallon tank •New magnetic starter •All brass check valve is new •Lifetime (silver contacts) ultra-HD olde school square D pressure switch •2 New Kevlar V-belts •need a dedicated 50A breaker to run it Not interested in low offers, this unit is as good as a new & these run just shy of $4k for this 7.5hp model. They are made the most robust & one of very few (Saylor Beall is 1 other) still 100% made in 🇺🇸USA 🇺🇸