This is an acoustic Ibanez Artwood Series model AC300-NT which comes standard with no electronics or pickup. It has a solid Sitka spruce top with an African mahogany fretboard and Indian rosewood back and sides. It has intricate abalone Rosette and mother of pearl inlay on the neck and the head with diecast Chrome tuning machines and to strap pins. I did some customized alterations to improve sound and increase capabilities of instrument. I replaced the nut with an ivory tusk genuine nut which I filed to improve action and intonation. I also installed pick up and instrument cable amplification device that is non-intrusive so it was not necessary to alter or modify the body of the guitar in any way I installed a special magnet inside the body of the guitar behind the saddle so that the clip on pickup device sits directly above it on the outer part of the body being secured only by the magnetism. Small auxiliary cord runs from the pickup to a custom-made instrument cable jack that conveniently it's over the strap pin at the butt of the instrument where are you can insert instrument cable and play on any amp you like. It requires no power source. If you do not want to play through an amplifier all you have to do is take it off with ease and be straight up acoustic again. It was an expensive piece of equipment but I believe it was well worth it since this Ibanez is more than worthy to be played and heard loudly.