Brand

Raceface

CINCH bottom bracket Spindle Kit, CINCH Chainring, & factory OEM Crankarms. This was the original Spindle Kit off my 2020 Pivot Firebird 29er Carbon Enduro mountain bike because I swapped to the RaceFace Next (R) [Carbon] Crankarms that I had bought to upgrade my bike... which caused me to need a wider/longer Spindle Kit to use with the RF Next R Carbon Crankarms. The only thing that wasn't on my bike was the CINCH Chainring. I ended up ordering it, having it installed, but it didn't fit properly... it's NOT made for Shimano 12 spd systems! This orange-colored 34T Raceface DM Chainring is only for Shimano 9-11 Spd Systems! This is the entire kit & it includes the following: - CINCH System Narrow Wide Chainring 34T, for 9-11 Spd Gearing, with a Direct Mount (but not for Shimano XT+ 12 spd system; custom build required if going to Raceface Carbon Crankset to work with Shimano 12 spd bike). Don't mind the black-colored RF item bag, it's just to show a clear picture that it's a genuine RF item from Canada. - Raceface Factory OEM Spindle Kit + all hardware (BSA PF30 68/73MM (BB92/89 - 392) (RF138XCSL1(contact info removed)02) - Factory OEM Raceface Next SL Aluminum Crankarms with all o-rings & required spacers. - "All Mountain" branded crankarm protectors. Can part out separately if needed? Also, this type of setup is for medium-travel (120mm+) forked mtb's with at least 120mm rear suspension. Minus the orange-colored Raceface Chainring, everything you see here came off my 2020 Pivot Firebird 29er Carbon mtb but because they are not for DH-spec bikes... they will fit any other bike with a proper sized (BSA Press Fit 30 68/73MM (Bottom Bracket 92/89 - 392)