Enhanced Voltage Meter W/ Bluetooth
$200
Last updated about 2 years ago in Elyria, OH
Condition: Used (normal wear)
Listed in categories: Home & Garden - Tools & Machinery - Workshop equipment
Sold by
SOLD
Details
- Material
- Plastic
- Type
- Workshop equipment accessories
- Brand
- SNAP
Description
Measures ohms, AC/DC volts, true-RMS AC, AC/DC amps, Hz frequency, capacitance and more to cover most automotive electrical needs • Larger 4" color display for easy reading and quick identification of symbols (note: The tradeoff for the large color display- unit is not recommended for use in sunlight) • CAT-III 1,000 V AC and CAT-IV 600 V AC hybrid safety ratings mean its safe to use on hybrids • Convenient test lead storage wrap with retention strap • Built-in tilt stand and optional strap hanger (EEDMMAGSTRAP) for easy viewing • Button Functions: Auto or manual range, record mode, hold/lock, duty cycle, low pass filter and second functions • 7-year warranty • COLOR LCD 4,000 count, 41 segment bar graph • Record mode stores min/max readings • Ability to manually select range or allow auto ranging • Select continuity buzzer or diode test (displays yellow) • OHMS measures resistance in plug wires, coils, sensors and continuity • DC mV 40 mV range w/0.01 mV high-resolution accurate low volt readings • DC V Measure up to 1,000 V, test circuits and sensors • TRUE RMS (AC) Root Mean Squared vs avg rectified, use for ABS wheel sensors • Hz/ DUTY CYLE Measure in percentage the on time of sensors • REL Relative mode factors out lead resistance for improved low-ohm measures or differential • HOLD Lock the reading in hard to reach location for later reference • LPF Activate Low Pass Filter to reduce AC noise • AC/DC Current Measure parasitic draw from battery with ignition off • Hz Frequency Measure the frequency of sensors and signals • CAP Measure the capacitance of condensers or capacitors • TEMP With *optional EEDMTEMP-1 K-type adapter measure °F and °C Internal Fuse Test: • Before you call the 800 number • Set unit to diode test with FUNCTION button • Plug the black test lead into red “VΩ” input • Touch the prod end of black lead red “A” input • If the meter reads “OL” fuse is blown, replace • If there is a reading other than “OL” fuse is OK • Technical Support: (contact info removed) Specifications Capacitance Yes RPM EEDMRPMG (optional) Battery Life (Continuous Use), hours 10 Low Pass Filter (LPF) Yes Adjustable Trigger Level No Temperature EEDMTEMP-1 (optional) AC Volts 750 Power Supply 9 V Lithium Battery (purchased locally) Micro Amps Yes Country Of Origin KOR Dimensions, inches 4.7 x 7.7 x 1.6 Noise Reduction Circuit No mS Pulse Width No CAT Rating CATIII 750 V AC, CATIII 1,000 V DC, CATIV 600 V AC/DC Prop 65 Warning WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to https://offerup.co/faYXKzQFnY?$deeplink_path=/redirect/ Backlight Always On Auto Shut-Off Yes Test Leads EEDMLEADSET Certificate of Calibration Model EEDM525FCRT DC Amps 10 UL® Listed cULus 61010-1 Glitch Capture No Insulation Test No Analog Bar Graph Yes Resistance, ohms 40M Basic DC Accuracy 0.005 Data Hold Yes Nylon Pouch, Zipper Case EEDM5F-POUCH, EEDM5F-CC (optional) Auto Range Yes Duty/Dwell Duty Only True RMS (Root Mean Square) Yes AC Amps 10 Display Count 4,000 Color Fuses EEDMFUSE-7, EEDMFUSE-8 Blown Fuse Identifier Yes Comp. Output (USB) No Min/Max Yes DC Volts 1,000 Easy Open Battery and Fuse Door EEDM5F-DOOR Color Screen Yes Frequency Yes
Save, Report, and Share
Item location map
Related searches
- Tool box
- Compressor
- Pressure washer
- Welder
- Table saws
- Chainsaw
- Generator
- Ladder
- Snap on tools
- Saw
- Drill
- Power tools
- Motor
- Ladder rack
- Wrench
- Hammers
- Nailgun
- Freon
- Soldering iron