Norco Six SE Enduro Full Suspension Frame
$395
Last updated 6 months ago in Woodbridge, VA
Condition: Used (normal wear)
Listed in categories: Sports & Outdoors - Bikes & Cycling - Bicycles
Sold by
Additional images
Details
- Frame Size
- 17”
- Type
- Mountain bike
- Brand
- Norco
Description
2007 Norco SIX SE Full Suspension Enduro MTB Frame for Enduro, Downhill, Freeride, Jumps, Drops Update: “newer” 2014/2015 Marzocchi Roco TST R shock with NukeProof Spring now installed. No longer the red shock. Items Included in this listing: frame with rear shock (just installed a different shock, new bushings and mounting bolts), new (seat post, quick release collar, and aluminum headset with sealed bearings). 17” frame measured from center of bottom bracket to top of seat tube, for 26” wheels/tires. Standover height may be around 30-32" Frame is aluminum with gussets, strong and durable. Has what looks like an anodized Champagne Silver finish with a light shot peened texture. With rear shock it weighs about 10 lbs. This was the top of the line frame of the SIX series MSRP$5300 back in 2007. Surface scratches, wear around bottom bracket, some cable wear, and tire rub. Other than that I don’t think I saw any dents or cracks that I know of. The red 2009 Marzocchi Roco TST R Shock has been replaced with a 2014/2015 model, black shock of the same model with what looks like good almost new seals, NukeProof coil spring with spring perch spacers and new bushing. The shock is 8.5” eye to eye with a 2.5" total stroke. Brand new mounting hardware now installed. The frame pivot bearings and bushings seem smooth and ok. Specs: Rear Shock: Marzocchi Roco TST R with 500lb 3” NukeProof spring (8.5” eye to eye) featuring - Trail Selection Technology (TST)- Rebound- bottom-out resistance via air valve- Spring Preload The linkage has shock eye mounting points for 5.7” or 6.5” (145mm - 165mm) rear travel. (Original Factory Fork was 160mm) Headset type: 1 1/8” external cup (EC34) Sealed Cartridge bearing headset now included Bottom Bracket shell: 68mm wide English Threaded Seat post size: 30.0mm (6”-7" max insertion) new one ordered and now included (I'll be making a telescoping style of seat post similar to the Titec Scoper 30.0mm that originally came with the bike). So when I'm done buyer will have a choice of a cut straight post or the telescope style) or both. Seat post collar : 34.9mm, new one ordered and now included Rear dropout is 10mm x 135mm O.L.D. (Standard QR style) Front derailleur if you actually want to mount one: 31.8mm Frame measurements: Effective seat tube length from center of BB: 17” Effective top tube length from center of seat tube to center of head tube: 22” Chain stay length center of dropout to center of BB: 16 3/4” Head tube length: 5” Max seat tube insertion (shock interference): ~6”-7” I tried mocking up the frame with a long travel fork of about 150mm total stroke with a stem, seat post and wheels. It looks pretty good. The fork, wheels, and stem are not included. This would be a good frame for a project enduro, downhill, or freeride bike! It’s kind of on the heavy side but then, it’s overbuilt for downhill so a long travel fork or even those double crown downhill forks will work.
Additional details
- Wheel Size
- 26”
- Frame Material
- Aluminum
Save, Report, and Share
Item location map
Related searches
- Bike
- Mountain bike
- Road bike
- Bmx bikes
- Bike racks
- Trek bikes
- Electric bicycle
- Specialized bikes
- Schwinn bike
- Cannondale bikes
- Folding bike
- Kids bikes
- Bike trailer
- Cruiser bikes
- Giant bikes
- Girls bikes
- Downhill bike