HEAD SEAL Blown Head Gasket Repair

Placement On Vehicle

To use Bar's Leaks Head Seal Blown Head Gasket Repair, follow these steps: Ensure the engine is cold: Make sure the vehicle's engine is cool enough to safely remove the radiator cap. Add the product: Shake the bottle well and pour the entire contents directly into the radiator or coolant reservoir. Run the engine: Reinstall the radiator cap, start the vehicle, turn the fan and heat on high, and run the engine for about 15 minutes. Check for resolution: Observe if the symptoms of the blown head gasket (e.g., white smoke, coolant loss) are resolved. Cool down and top off: If needed, switch off the engine, let it cool down, and top off the radiator with coolant. Optional follow-up drive: Take the vehicle for an easy drive of about 15 minutes to confirm the repair. Caution: The product is a skin and eye irritant. Read the instructions and warnings on the back panel of the product for complete safety information.

Brand

Bar's

Fitment Type

head gasket repair solution

User reviews 3.7/5 Bar's Leaks Head Seal Blown Head Gasket Repair HG-1 is a product that can be used to solve coolant-related head gasket issues in a vehicle. It is a fast and safe solution that can be used with all types of 50-50 mix coolant, including yellow, orange, pink, red, blue, and green silicate based and non-silicate based (OAT/HOAT) antifreeze, and/or water. A vehicle is a good candidate for this solution if it can idle for 15 minutes without overheating or having to add coolant.