HELIX C FOUR 4-CHANNEL HIGH-END AMPLIFIER WITH INTEGRATED, ACTIVE CROSSOVER

HELIX C FOUR CAR AMPLIFIER IN EXCELLENT AND WORKING CONDITIONS NO DAMAGE AT ALL LIKE. EW OR BEST OFFER Audiophile sound quality combined with impressive output power The C FOUR is a high-end 4-channel amplifier that has been designed down to the last detail for ultimate sound quality. Audiotec Fischer’s proprietary ultra low-noise and ultra low-distortion Class A driver stage feeds a total of 32 hand-selected MOSFET power transistors, resulting in an incredible damping factor of 1,000 for relentless control of every loudspeaker. The intelligent regulation of the power supply assures stable conditions for the output stages and therefore phenomenal output power independent of the cars battery voltage. In combination with the optionally available digital input module HDM 2, the C FOUR demonstrates the perfect transition to the digital era. The HDM 2 accepts digital audio signals up to 96 kHz sampling rate via its two optical inputs followed by cutting-edge BurrBrown D/A converters with 32 Bit resolution that transform the signals back to the analog domain. Therefore the C FOUR is absolutely future-proof and perfectly prepared for the combination with our digital signal processors. Press & awards HELIX_C-Four_CAR-Hifi_Klangtipp_201806HELIX_C-Four_CAR-Hifi_201806 Technologies Amplifier Class Class AB Feature Inputs RCA Input Feature Helix Digital Input Module Feature Hardware Technologies Regulated Power Supply Feature Surface Mounted Device Active Crossover Feature Additional Features High Res Audio Feature Start Stop Capability Feature Made in Germany Feature Features Extremely broadband Class AB amplifier with eight selected MOSFET transistors per channel for exceptional sound quality - ideal for High-Resolution audio Ultra low-noise and distortion-free power amp drivers in Class A technology Enormous damping factor of 1,000 @ 4 Ohms for perfect speaker control Optionally available HELIX Digital Input Module (HDM) to extend the amplifier with two optical digital inputs in SPDIF format Integrated, active crossover with highpass, lowpass and bandpass Regulated DC / DC switching power supply with Start-Stop capability down to 6V supply voltage Microprocessor-based monitoring of amplifier status including temperature-dependent fan control Input Mode switch for flexible routing of the input signals Cutting-edge BurrBrown D/A converters with 32 Bit resolution in combination with the optional HDM 2 module Massive 24-carat gold-plated power and speaker terminals Quad-layer PCB with extra-solid 70μ copper traces for lowest possible losses and SMD (Surface Mounted Device) manufacturing technology Special features: Start-Stop capability The switched power supply of the HELIX C FOUR assures operation even if the battery’s voltage drops down to 6 Volts during engine crank. High-Resolution audio The extremely broadband audio bandwidth of the amplifier ensures a lossless audio reproduction of High-Resolution audio content to provide the best possible sound in studio quality. Technical data Output power RMS ≤ 1% THD+N - @ 4 Ohms 4 x 150 Watts - @ 2 Ohms 4 x 220 Watts - @ 1 Ohm - - bridged @ 4 Ohms 2 x 440 Watts - bridged @ 2 Ohms - Max. output power per channel* Up to 250 Watts RMS @ 2 Ohms Amplifier technology Class AB Inputs 4 x RCA / Cinch 1 x Remote In Optional via HDM 2 module: 2 x Optical SPDIF (28 - 96 kHz) Input sensitivity RCA / Cinch 1 - 8 Volts Input impedance RCA / Cinch 7.5 kOhms Input impedance highlevel - Outputs 4 x Speaker output Output voltage RCA / Cinch - Signal converter for digital input - Frequency response 10 Hz - 80,000 Hz Bass boost - Highpass 15 Hz - 4,000 Hz adjustable Lowpass 15 Hz - 4,000 Hz adjustable Bandpass 15 Hz - 4,000 Hz adjustable Subsonic - Phase - Slope high- / lowpass 12 dB/Oct. Slope subsonic / lowpass - Signal-to-noise ratio digital input - Signal-to-noise ratio analog input 112 dB (A-weighted) Distortion (THD) < 0.007 % Damping factor > 1000 Operating voltage 9 - 16 Volts (max. 5 sec. down to 6 Volts) Idle current 2400 mA Operating temperature range -40° C to +70° C Fuse 3 x 30 A LP-Mini-fuse (APS) Additional features Active, adjustable crossover, HDM slot, input mode switch, High-Resolution audio, Start-Stop capability Dimensions (H x W x D) 37.1 x 430 x 240 mm / 1.46 x 16.93 x 9.45" * In typical multi-channel applications (2- / 3-way system + rear + subwoofer) Scope of delivery 1 x High-end amplifier HELIX C FOUR 2 x Allen key 1 x Mounting material 1 x Instruction manual Kicker alpine ppi Orion pioneer Jl audio Kenwood dynamics skar massive Alpine Kenwood kicker sundown Fi audio sub subs 8 10 12 15 18 pioneer DC audio DD audio Digital Designs Taramps L7 W7 W6 W3 JL Skar SSA Crossfire Alpine Ampere B2 audio Boston Cadence Elemental Fosgate Hifonics Lanzar Memphis Mtx Rd Tantric Zapco CT Sounds xs power limitless lithium JY power Skar Au

Condition

Used (normal wear)

Model

C four

Brand

Helix