Blurred Vision Audio Diamond Series DS-5K.1D 5000RMS 1 Ohm

Blurred Vision Audio DS-5K.1D - Compact 5000 RMS Full Range Amplifier Small Footprint Technology! Blurred Vision Audio amplifiers raises power amplification to a new standard of quality and usability. The new line delivers the most innovative and powerful Brazilian technology in compact full range amplifiers on the market. Loaded with features, it provides an unsurpassed efficiency rate of 85-95% in a compact Class D full range amplifier. Specifications: Number of Channels: 1 RMS Power at 1 Ohms 5000 Watts RMS RMS Power at 2 Ohms 2500Watts RMS RMS Power at 4 Ohms 1600 RMS Supply Voltage: 10 ~ 16 Volts Frequency Response: 10Hz ~ 20KHz Crossover Low Pass: 50Hz ~ 20KHz Crossover High Pass: 10Hz ~ 700Hz Signal to Noise: > 91-100 dB Harmonic Distortion: < 0.05 % THD Input Sensitivity: 400mv-3.6Volts Impedance Output: 1 Ohm * 2x Clipping Indicators *Built in Voltage display *Built in with 4 High Powered Fans * 2 Pair of Dual Inputs included * Dual Bussed Distribution block and 2x 500amp fuses also provided Dimensions (L x W x H): 10.57” x 15.75” x 4.5” Weight: 11.3Lbs Features: The Blurred Vision Audio DS-5K.1D offer 1 channel with advanced individual equalization features for Bass, Mid Bass and Mid High, plus the traditional Level, High Pass and Low Pass features. Its Full Range frequency response from 10Hz to 20KHz allows the installation of Subwoofers, Woofers, Drivers and Tweeters. Use the guide Below for recommended applications, where you can get the full potential of your amplifier.Blurred Vision Audio DS-5K.1D Before Installing: You must follow the instructions for the product’s installation and connections to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines: • Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to the equipment connected to the amplifier; • Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference; • Always use 100% Cooper cables and good quality connectors. This guarantees the sound’s quality and fidelity; • To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: Use a fuse 12 inches away from the battery as a safety precaution The power rating data is based Rated power tested with 80Hz to 1KHz sinusoidal signal and THD <= 10%, with resistant load referring to the indicated measurements. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications ( with speakers ), any load test ( resistant load ) is not recommended. Package Including: Amplifier 4 Dual Inputs Dual Fuse block 2x500A fuse Bass Knob Decals & Instructions