Boat

a 2008 G3 Eagle 170 with a Yamaha 90 on it. It is a project, but a majority of the work has been done, the deck has been replaced with 3/4 marine grade plywood that is painted with rustoleum marine primer. Originally the deck was screwed in with self tappers, so I had all the holes tacked and used threaded rivet inserts to hold the decks down. The casting deck is carpeted with 20 oz grey carpet. For ease of installing fish finders, I ran conduit down the driver side of the boat for running electrical. I also purchased and installed a recessed trolling motor pedal packet that is in the deck. While I had the deck off, I had the supports along the bottom of the boat replaced and rewelded as some were cracked. Additionally the previous owner had a repair done to the side of the boat that I had the welder verify the integrity of. After this I did launch it to make sure there were no cracks in the hull and water intrusion. All went well.registered, new tires. Dm for information.