KKL OBD2 VAG USB Interface Cable with  FTDI FT232RL Converter Chip for 3rd party Software and app.

The VAG KKL USB Interface is a cost effective diagnostics and reprogramming tool compatible with the ISO9141 and KWP2000 communication protocols found on many vehicles and motorcycles and is compatible with a wide range of 3rd party diagnostic software. Our high quality VAG KKL Interfaces use the reliable and widely supported FTDI FT232RL chip and has the most connected Pins internally. Beware of other VAG cables that don't!  Beware of other VAG 409.1/KKL cables that have the cheaper, unreliable CH340 USB/RS232 serial converter chip and a different PCB design that is not compatible with other applications including NDSII. These cables look very similar, but are not the same internally.  Some Compatible Software Includes:  NDSII (Windows): OBDII up to year 2007  VCDS-LITE for Volkswagen, Audi, SEAT, Skoda (See features below)  TuneECU (Windows): For Ducati, Triumph, KTM, Aprilia Benelli, Moto Guzzi, Moto Morini  TuneECU (Android Application): For Ducati, Triumph, KTM, Aprilia Benelli, Moto Guzzi, Moto Morini  GuzziDiag  JPDiag  TunerPro  Multiecuscan (Windows)  VW-Tool  AlfaDiag  BMW Cartune  APR Immobilizer Information Reader  FreeDiag (Linux Based)  REVO Lemmiwinks ECU Tuning  Subaru FreeSSM  And much more!  Features:  Fully supports Single and Dual K-LINES  Uses a high quality and reliable Genuine FTDI FT232RL USB/RS232 Serial Converter Chipset  Compatible with many 3rd party diagnostic software  Compatible with Nissan DataScan II for Windows  Compatible with GuzziDiag, JPDiag and TuneECU for diagnostics and ECU remapping  Includes our easy driver installation guide  Compatible with VCDS-Lite 1.2 software for Windows XP 7 8 8.1 10 (32/64 bit)  Compatible with most year 1990-2004 VW, Audi, SEAT and Skoda models, but DOES NOT work with any model requiring a direct CAN connection for diagnostics  Read/Clear DTC trouble codes, read Control Modules, Code Modules, Adaptions  Connected Pins:  PIN 2: SAE J1850 (POSITIVE +)  PIN 4: Chassis Ground  PIN 5: Signal Ground  PIN 7: K-LINE ISO9141  PIN 10: SAE J1850 (NEGATIVE -)  PIN 15: L-LINE (KWP2000)  PIN 16: +12V Power  Specifications:  USB Interface: 2.0  Diagnostic Interface: OBDII 16 Pin  Voltage: 12 VOlts  Operating System: Windows XP 7 8 8.1 10 32/64 bit or Mac OSX using a virtual machine  USB/Serial Converter: FTDI FT232RL