Tactical Scorpion Level III+ Body Armor 10x12 Flat - Lighter Than AR500

banner Level III+ Body Armor 10x12 Flat - Lighter Than AR500 A stand alone armor plate with multiple hit capability – Easily passed NIJ.0.06 6 shot stand alone tests against 5.56 M855 M80 ball (greentip) and 5.56 XP193 55 Grain FMJ boattail . In house testing defeated 30-06 165 grain copper tip trophy. Base coat is fully encapsulated with 40 mils to protect against corrosion, chemicals and sweat Optional Spall coat ( build-up) is 225 mils .20″ thick on strike face Will fit most common carrier vests ( We manufacturer a full line of carrier vests) Laser cut NIJ Certified Models Fully tested by independent Lab to 6 shot stand alone tests against 5.56 M855 M80 ball (green tip) and 5.56 XP193 55 Grain FMJ boat tail For front and/or back protection Simply Stronger, Thinner and lighter that the competition DEPARTMENT OF JUSTICE / NATIONAL INSTITUTE OF JUSTICE COMPLIANT BODY ARMOR Our new proprietary ballistic steel core is far stronger than the AR500 – AR650 steel core. This core is hardened all the way through unlike the AR500 – AR650 which is only surfaced hardened. At only 0.197 inches thick nominal makes it 20% lighter than the AR500 and superior in strength. Our build-up spall coating is done with a Graco EXP-2 which is the top of the line high pressure heated coating system. Our plate core is chemically washed and etched on the strike surface to eliminate the coating from delaminating when shot which keeps the shrapnel from escaping from the armored assembly. We utilize a laser cutting table for the cutting of all our Armor products. If the seller of armor plate does not mention how its cut, then you can guarantee it’s not by laser. There is no equal method Plasma cutting cuts slowly, this puts a lot of heat into the steel. ( Submerged plasma cutting machine is no better) This excess heat can result in excessive chipping and damage near the cut edge during use and easily shattering when shot. Plasma cutting generates large amounts of heat that is deposited into the target, softening it’s edges. The heat-affected zone (HAZ) generated by plasma cutting is the largest out of the most commonly used methods for cutting abrasion resistant steel. Most AR500 is cut with plasma cutters as they are cheap and relatively small compared to other methods. Our Curved plate is formed on a custom laser cut die set with single radius bend on a custom built Omron computer controlled hydraulic press guaranteeing a perfect formed plate each time. Here at Tactical Scorpion Gear we manufacture our own vest carriers, Kevlar level IIIA vests and all our products. We have every item listed in stock. Weights : All weights are in pounds Level III+ lightweight spall coated 6x6: 39 ounces 6x8: 52 ounces 8x10: 80 ounces 10x12: 119 ounces 10x12 modified: 104 ounces 11x14: 157 ounces Level III+ lightweight base coated 6x6: 33 ounces 6x8: 44 ounces 10x12 modified: 88 ounces 11x14: 138 ounces Coated with Super strong hybrid polyurea for the protection of the steel. Tested by HP White laboratory This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor NIJ tested Level III+ Armor We only manufacture our plates from certified steel with a Brinnell Hardness Rating of 610- 630 BHN Terms And Conditions By purchasing the body armor contained in this listing from East West Consolidated, LLC, d/b/a Tactical Scorpion Gear (“Seller”), you (“Purchaser”) agree to be bound by the following terms and conditions: Purchaser represents that s/he is at least 18 years old or the age of majority in the State or Territory in which s/he resides. Purchaser is not a convicted felon at the time of purchase. Seller will not sell body armor to any citizen or resident of the State of Connecticut. Purchaser is legally allowed to purchase, possess, and/or use the purchased item(s) in Purchaser’s State/Territory, County/Parish, and municipality, and affirms that such purchase does not violate any federal, state, or local laws. Seller makes no representations to Purchaser about the legality of any Purchase of body armor. Seller makes no representations about the consequences to Purchaser in the event Purchaser buys the body armor in contravention of any applicable federal, state, or local law. Purchaser is encouraged to seek qualified legal counsel in his/her jurisdiction if Purchaser has any questions concerning ab federal, state, or local laws. Seller is not responsible for Purchaser’s violation of any federal, state, or local law concerning the Purchaser’s purchase, use, re-sale, other distribution of any body armor obtained from Seller. This disclaimer applies to any re-distribution within or outside of the United States. Seller will cooperate with any federal, state, or local law enforcement agency investigating the purchase or use of body armor by the Purchaser. Purchaser is not buying the body armor on behalf of another person in an effort to avoid compliance with these Terms and Conditions or to circumvent any applicable federa

Condition

New

Brand

Tactical Scorpion Gear