🔥【PRO TESTED】Crown CTs 600 2Ch 600W Power Amplifier!2/4/8/16Ω,70/140V💥

Model

CTs 600

Type

Audio amplifier/receiver

Brand

Crown

This listing is for a lightly-used CTs Series Power Amplifier made by Crown! PROFESSIONALLY TESTED & GUARANTEED!** Crown’s Commercial Audio mixer/amplifiers deliver legendary Crown quality to the commercial audio industry. Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet™ and CobraNet™ allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution. The Input Sensitivity can be set via two switches behind the back plate. In Dual Mode, the CTs 600 can drive 2/4/8 ohm speakers or power 25/50/70V lines, in Bridge-Mono mode, the CTs 600 can drive 4/8/16 ohm speakers or power 140V lines. This rack-mount unit weighs in at just under 23 lbs and measures 3.5" x 14.25" x 19" wide including the rack ears. **NOTE: This amp uses Phoenix Type input connectors.** **If not completely satisfied return for a full refund.** Condition: This beautiful amp is in "Very Good" condition with minor signs of use! Aside from a few scuffs to the lid and rack ears, the only thing worth mentioning is some light scuffs to the front panel that are hard to make out in the pics. The AC cord is included. The manual has gone missing, no worries though, it can be found online or we will send you the PDF file directly on request. Please inspect all the pictures thoroughly for actual condition. Testing: This amp was set up on our test bench and it pumped out clear, distortion-free audio from all outputs with no hum or buzz. All inputs, outputs and controls are confirmed working as intended. Further testing was performed, if there is a particular function you would like to know more about just let us know before buying. What a great find on a quality piece of audio equipment! **FREE SUPPORT MUST BE UTILIZED BEFORE RETURN IS REQUESTED! Manufacture Product Information: Crown CTs 600 Power Amplifier CTs 600 | Crown Audio - Professional ... Features High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis Crown Switching Power Supply for lighter weight Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200 Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· "FIT" (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels Comprehensive array of indicators provide accurate diagnostics Two-channel models are fully PIP2-compatible. Multi-channel models accept MC accessory modules. Specifications Channels 2 Sensitivity 1.4 V Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted) 105 dB THD (full rated power, 20 Hz - 20 kHz) < 0.1% Damping Factor (10 Hz to 100 Hz) <3000 Frequency Response (at 1W, 4/8 ohms) +/- 0.25 dB Crosstalk (below rated power) 20 Hz to 1 kHz > 80 dB Common Mode Rejection (20 Hz to 1 kHz) > 50 dB Maximum Input Level before Compression +20dBu Load Impedance 70V, 100V (2-16 Ohms) Voltage Gain (at maximum level settings) (8/4 ohm operation) 35:1 (31 dB) Power Draw at Idle (120VAC mains: standby mode) 24W Dimensions 3.5" x 19" x 14.25" Weight 22.8lbs Shipping Weight 27.7 lbs This item has minor wear consistent with average use, please see pics. You will receive exactly what is pictured, no other accessories, test equipment or media are offered.