MILLER MILLERMATIC 140 MIG WELDER WITH AUTO-SET

MillerMatic 140 MiG Welder Complete mig welding set up Comes with welder, cart, auto darkening helmet, gloves, gas bottle and regulator. Barely used The Miller Millermatic 140 Auto-Set features a breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG minus the guesswork; simply set the wire diameter, set the material thickness and start welding. It's that easy! Prefer to set the parameters on your own? Manual Mode gives you the flexibility to manually set the machine when welding aluminum, stainless steel or anytime you want to set your own parameters on mild steel. Thermal Overload Protection shuts down the unit and activates over-temperature light if airflow is blocked or duty cycle is exceeded. Once the unit cools and the fault is corrected, the unit automatically resets its self. If that isn't enough, patented Tip Saver Short Circuit Protection shuts down output when tip is shorted to the work. This extends contact tip life and protects internal components from damage. A trigger reset allows you to quickly reset at the torch rather than the unit. Miller's advanced Smooth-Start technology provides a smooth, spatter-free start. They even make the claim that this is the best starting machine in the small MIG category. No more pop-gun starts or spatter to clean up. The Durable Cast Aluminum Drive System incorporates dual groove quick-change drive roll and spring-loaded tension arm with calibrated tension knob; all designed to make setup easier and faster. Standard built-in, solid-state contactor circuit makes wire electrically "cold" until trigger is pulled. This makes the unit safer and torch easier to position before starting to weld. Comes complete with: • Power source with Auto Set • 6ft power cord and plug • Spoolmate 100 Spoolgun • 10ft M-100 MIG Gun and cable assembly • 10ft work cable and clamp (ground) • Smith Argon and Argon/CO2 Regulator/Flowmeter gauge with hose • Spool of Hobart .030 Solid Wire • Dual groove quick-change drive roll for .024 AND .030/.035 wire • Factory installed gas solenoid valve • Information/Settings Chart • Thickness gauge

Condition

Used (normal wear)

Type

MIG Welder

Brand

Miller