Vintage Rack Mountable Radio Shack MPA-200 100 Watt Amplifier

Vintage Rack Mountable Radio Shack MPA-200 100 Watt Amplifier in good shape externally but doesn’t turn on. Part of my father in laws collection, it’s been in a climate controlled basement for sometime and doesn’t power on now. Possibly an easy fix for someone who know what they’re doing. Make an offer, need gone asap. Radio Shack MPA-200 200-Watt Stereo PA Amplifier gives you the power and versatility you need in a professional sound system. The amplifier's wide frequency response makes it suitable for amplifying music and voices. You can use it for live bands, office paging systems, public announcements, or anything else that requires great sound. Phones Jack - lets you connect stereo headphones for private listening or monitoring sound A/B Speaker Switch - lets you select speakers on channel A, channel B, or both. Power Meter - indicates the output signal level. Left and Right Output Level - let you adjust the volume of the left and Gain Controls right channels. Meter Range Selector - lets you control sensitivity of the power meter. CLIP Circuitry and indicator - this special circuitry protects the amplifier and your speaker system from being damaged by overdriving power, and the indicator lights to remind you to reduce the volume when the amplifier output is too high. MPA-200 Stereo PA Amplifier Specifications: Input Impedance: ................................................. 47 kOhms Continuous Power Output (both channels driven) @ 20 Hz to 20 kHz: ........ 100 watts per channel(8 ohm) RMS 4-Channels @ 1 kHz: ................. 120 watts per channel(4 ohm) RMS Total Harmonic Distortion: ................. 0.1% at rated power, at 8 Ohms .05% at 100W power, at 4 Ohms Frequency Response: .............................. 10 Hz to 50 KHz +/- 3 dB Input Sensitivity: ....................... 0.5 Volts for 100 Watts at 8 Ohm Signal to Noise Ratio: ................................. 90 dB (A-weighted) Speaker Impedance: ....................................... A, B (4-16 Ohms) A + B (8-16 Ohms) Power Requirement: ........................................ 120 VAC @ 60 Hz Power Fuse: ................................................ 6 Amp/250 Volt NOTE: The amplifier requires a 250-volt, 6-amp fuse for protection from power surges and short circuits. (See "Replacing The Fuse" on Faxback Doc. # 14632. Dimensions (HWD): .......................... 5 5/6 X 18 7/8 X 14 1/4 Inches (11.4 X 48 X 30.5 cm) Weight: ................................................. 26.45 lb. (12 kg)