Carvin Vintage 50 Watt Guitar Head and matching 4x10 cab with Weber Blue Pup speakers. 1990s Tweed

Type

Electric

Brand

Carvin

Carvin Vintage 50 watts Tweed guitar head. and matching 4x10 cab with Weber Blue Pup speakers. I’m not original owner. I’ve owned it for over ten years and gigged with it on and off. Mainly used the clean channel with pedals. The pots did get a little scratchy after sitting around. I used some electrical spray cleaner and it removed the scratchy noise. It could use a look over just to get it cleaned. The rest of the description is from Carvin: True vintage tones give "open-ness and breath" to your playing as you power soak the EL84 tubes. Dual channels offer all the vintage features you need. This guitar amp reflects our devotion to tone. Rich, thick harmonics with creamy smooth mid tones define the superb sound of these amps. Channel one is clean ranging from warm and mellow to shimmering and glassy. Channel Two, with its SOAK control, offers enormous 12AX7 grid control from smooth blues, to full sustain. Matched EL84 output tubes react to the subtlest touch - if you play soft, the tubes remain clean. If you drive the amp hard, it rings out with rich tube harmonics. Spring reverb enhances the overall sound of the amp. The newer amps have a digital reverb, this is a SPRING Reverb. - All tube design - four 12AX7 tubes - Four EL84 matched output tubes - 1 Meg ohms passive tone controls for broad adjustment range - BASS, MID, and TREBLE controls optimized for each channel - Clean channel Acoustic PRESENCE for shimmering highs - Spring reverb - Metal shaft controls, ivory knobs, red jewel lamp - Strong Poplar plywood enclosure - not particle board! - Covered in tweed vinyl - Output: 50 watts - 4ohms, 8ohms and 16ohms Impedance switch - Two 1/4" speaker jacks and cabinet voiced line out jack - External Effects Loop with preamp OUT / power amp IN jacks - AC POWER switch, high voltage plate STANDBY switch - 120/240 VAC - Dimensions: 22.5" wide x 10.5" deep x 9.5" high - Weight: 28 lbs - Power Req. 120VAC 60Hz - Made in San Diego, California