Onkyo Audio Receiver Model HT-R590

This is a high end audio receiver that originally sold for around $700 or $800 new. The unit powers up and all the functions work but there is no sound. Apparently this is a common problem for this unit and there are some rather easy fixes anybody can do that range from unplugging and plugging back in an internal cable to doing a factory reset by holding down a button. I haven't tried any of these things because I'm cleaning out a storage locker full of stuff. I have read that if none of the above fixes work then the audio chip would need replaced, or you can try reflowing the solder to that chip by simply baking the small circuit board it's on in an oven for 10 or so minutes. There are videos with instructions on doing all the above potential fixes. I'm selling it as is for $10. If I ever do get around to fixing it I'll be asking much more than that, so if you want to take the risk for $10 you might get a high end audio receiver dirt cheap. Here's some info on this receiver: The Onkyo HT-R590 A/V Receiver is a powerful unit that supports multiple Dolby formats for an immersive audio experience. The unit has a digital tuner and features analog and digital audio inputs, including USB, Digital Optical TOSLINK, and HDMI. The receiver has a 7.1 channel output and supports FM and AM modes. It has a built-in amplifier class A and outputs audio through RCA, headphone jack, HDMI, and raw cable speaker jacks. The unit is compatible with headphones and has a power output of 130 watts per channel at 6 ohms.