1989 Ninja 600r **Project Bike**

Story time: I bought this as a project bike in 2017. It was not a running motorcycle but its only issue was low compression due to worn piston rings, which was verified thru a wet compression test. I tore the engine apart and inspected the top end, everything checked ok except for needing new piston rings. After getting everything all back together, I made a huge mistake and touched/moved a pin that was holding a component in the transmission (I think the shift drum, not entirely sure). While bench testing that I had all everything put back together & adjusted correctly, I was trying to get the bike to shift into gear and accidentally cracked the crankcase where the shift linkage goes into the transmission. Now it needs a new crankcase, which I have but never got around to doing it. So to reiterate: The engine will need to be disassembled and reassembled with the used crankcase I purchased. Everything else is in proper working order. Comes with: -All the parts I had removed for the work I was doing -Clean, used crankcase -New brake line kit from Spiegler -3ft of new radiator hose -New brake pads -New windshield -New K&N pod air filters (bike did not come with OEM airbox) -Various new parts like gaskets n whatnot -Factory & Haynes service and repair manuals **I have done my best to put everything together, but if at any point whoever buys it realize some major component is missing, I will give you my phone number so that you can let me know and I will do my best to locate that piece. Clean title in hand. This could be a wicked nice bike if someone puts a little bit of elbow grease into it. Thanks for reading.