Maxim 50-Piece Impact Accessory Set, nut drivers & socket In Hard Case

Top Section (Lid) This section contains longer bits and specialized adapters: • Hex-Shank Drill Bits (Left): 4-5 titanium or black oxide drill bits with hex shanks (typically ranging from 1/8" to 1/4") for quick-change drilling. • Power Bits (Center): 2" bits including Phillips (PH2, PH3), Square/Robertson (SQ2), and Torx (T20, T25). • Nut Drivers (Right): A series of magnetic nut setters, likely sizes 1/4", 5/16", and 3/8". • Quick-Release Bit Holder: A magnetic sleeve used to hold the smaller 1" insert bits. Bottom Section (Base) The base houses the primary assortment of high-volume bits: • 1" Insert Bits (Top Row): A wide variety of standard tips including: • Phillips: PH1, PH2 (multiple), PH3. • Square: SQ1, SQ2 (multiple), SQ3. • Torx: T10, T15, T20, T25, T30. • 2" Power Bits (Middle Row): Longer versions of the most common Phillips and Square bits for deeper reach. • Nut Setters & Socket Adapters (Bottom Row): • Additional Magnetic Nut Drivers (larger hex sizes). • Socket Adapter: A 1/4" hex to 3/8" square drive adapter for using standard mechanics' sockets with your impact driver. In this Maximum 50-Piece Impact Accessory Set, the nut drivers and socket adapters are specifically sized for common automotive and construction fasteners. Here are the specific sizes typically included in this configuration: Nut Drivers (6 Pieces) These are the magnetic "nut setters" found in the top right and bottom row of the case. They are almost exclusively Imperial (SAE) in these 50-piece sets: 1/4" (Common for sheet metal screws) 5/16" (Common for HVAC and roofing screws) 3/8" (Standard for small lag bolts) 7/16" * 1/2" 9/16" (Found in the larger sets; if yours has 4, it usually stops at 7/16"). Socket Adapters (2 Pieces) These allow you to use your standard 3/8" or 1/2" mechanics' sockets with your impact driver: 1/4" Hex to 1/4" Square Drive 1/4" Hex to 3/8" Square Drive Hex-Shank Drill Bits (5 Pieces) The drill bits in the upper left are sized for pilot holes: Imperial sizes: 1/16", 3/32", 1/8", 5/32", and 3/16". Updated Ad Snippet (Technical Specs) Technical Specs Included: Magnetic Nut Drivers: 1/4", 5/16", 3/8", 7/16", 1/2" Socket Adapters: 1/4" and 3/8" drive Drill Bits: 5 high-speed steel hex-shank bits Driver Bits: Over 30 assorted Phillips, Square, Torx, and Slotted tips

Condition

Open Box (never used)