IRig Stomp I/O with Original Bag

Color

Black

Brand

IRig

The original bag is pricey and shipping takes a long time. Being included is awesome! Only opened the box and tested. I bought a new cable for it, which is included. Fits perfectly in its carry bag. IRig Stomp IO Specs Conversion: 24-bit A/D, 24-bit D/A Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz Power: USB bus powered (when used with a computer) or DC IN Device Connection: USB B-Type and Mini-DIN Enclosure: metal sheet Microphone Input Connector: balanced female 3-pin XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground Microphone Input Level: from 6 mVpp to 1.4 Vpp Microphone Input Impedance: approx 2 kOhms Gain Range: approx 48 dB Phantom Power: +48V ± 4V Frequency Response: 20 Hz – 20kHz +/-1.5dB Input Noise: -103 dB(A), -97 dB RMS Instrument Input Connector: unbalanced, Hi-Z, TS 1/4" Jack. Tip: signal / Shield: ground Instrument Input Level: from 30mVpp to 6.9Vpp Instrument Input Impedance: 1MOhms Gain Range: approx 27dB Frequency response: 20 Hz – 20kHz +/-1.5dB Input Noise: -103 dB(A), -97 dB RMS Stereo Headphone Output Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground Headphone Level control: numbered thumbwheel Headphone Output Power: 100mW into 50Ohms Stereo Line Output Connector: 2x balanced female 1/4" TRS Jack. Tip: hot / Ring: cold / Shield: ground Maximum Output Level: +16 dBu into 600 Ohms balanced load Output Impedance: 150 Ohms balanced Floating Balanced Outputs MIDI Input/Output Connector: 2x 5-pin DIN Connections and Controls Top Panel Four metal foot-switches with one indication LED each, dual color Two analog potentiometers for Input GAIN and output VOLUME "Stomp MODE" LED "Phantom 48V" LED "PEDAL" LED 4 segments mono input level meter (peak) 4 segments device output meter Continuous pedal (expression pedal) with virtual switch at the top of its travel Rear Panel Neutrik Combo socket for MIC input and Instrument input (auto selecting) +48V phantom power switch 1/4" headphones output 2 x 1/4" TRS Balanced floating line outputs MIDI I/O 5-pin DIN connectors 2 x 1/4" TRS External controllers sockets B-Type USB socket for connecting a computer (Mac/PC) Mini-DIN "iOS" connector for connecting an iOS device Barrel DC-in socket for powering up the Stomp I/O and charging the iOS device at the same time Package includes iRig Stomp I/O Lightning to Mini-DIN connection cable with charging features (60cm/23.62") USB A-Type to USB B-Type connection cable (2.5m/8.2ft) DC power supply Dimensions Size: 41.5cm/16.3" x 21cm/8.5" x 7.2cm/2.83" Weight: 3.2kg/7.1lb Lightning to Mini-DIN connection cable (60cm/23.62") USB A-Type to USB B-Type connection cable (2.5m/8.2ft) Compatibility iOS Devices Made for: iPhone 8 Plus, iPhone 8, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (10.5-inch), iPad Pro (12.9-inch) 2nd generation, iPad Pro (12.9-inch) 1st generation, iPad Pro (9.7-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 5th generation, iPad 4th generation. Also compatible with all newer iPhone, iPad and iPod touch models. *Note for iPhone 7, iPhone 7 Plus, iPad 9.7-inch (6th generation 2018) users: iOS 12 or later is required.