Evenflo SureRide/Titan 65 car seat. Newborns To 6 Years Old, Purple

Features

Forward or rear facing, Removable washable cover, LATCH compatible

Color

Purple

Age Group

Newborns to 6 yrs old

This seat offers some of the tallest harness slots of any convertible seat as well as a good fit for many newborns, making it is one of the only convertibles that will expire before kids outgrow it. Rear facing weight range: 5-40 pounds • Rear facing height range: 19-40 inches tall • Forward facing weight range: 22-65 pounds • Forward facing height range: 29-54 inches tall Measurements: Shell height: 28 inches tall • Lowest harness position: 6 inches • Highest harness position: 19 inches • Width at widest point: 20 inches • Seat weight: SureRide / Titan 65: 11 pounds (premium versions may weigh more) • Two crotch buckle slots: 4 and 6 inches Recline Stand: The recline mechanism is a stand that flips down for rear facing, and is stowed back for forward facing. When it is moved out for rear facing mode, it locks into place with a tab on either side. If a rolled towel is necessary to achieve the proper recline for rear facing, it goes under the stand. Rear facing: Lower Anchor installation When opening a brand new SureRide / Titan 65, we found the lower anchors threaded through the forward facing belt path and stowed on the storage clips at the top on either side of the seat. The lower anchor connector webbing is attached to the shell under the padding with a white plastic loop - don't cut this loop! To switch the lower anchors from the forward facing belt path to the rear facing belt path, move the webbing from the forward facing belt path into the rear facing belt path. The easiest way to do this is to fold back the cover on the seat part of the SureRide so you can clearly see the lower anchors and the white plastic strap. The cord is flexible and will easily move from side to side, allowing the lower anchor connectors to be switched from one mode to the other.Once the lower anchors are in the rear facing belt path and the recline stand is out, simply attach the lower anchors to the vehicle's lower anchors, and tighten. Installation forward facing seat belt: Installation Forward Facing Vehicle Seat Belt The SureRide’s forward facing belt path is very well marked and easily accessible. Once the seat is set up for forward facing, thread your seat belt through the belt path and buckle. Lock your seat belt, and tighten until there is less than one inch of movement when checked at the belt path. Finally, attach and tighten the tether. Newborns up to 6 years old!

Brand

Evenflo