Harmon Kardon AVR 1600

Harmon Kardon AVR 1600 Specs General Specifications Processor 24-Bit, twin-core Cirrus Logic® CS 497024 DSP processor Power Requirements AC 120V/60Hz Power Consumption 65W idle, 540W maximum (7 channels driven) Digital Inputs (coaxial/optical) 2/2 on rear; 1/1 on front HDMI Three inputs/1 output, switching only. Analog Inputs 1 A/V on front panel Analog Inputs 1 audio-only mini-jack Analog Inputs 2 audio-only Analog Inputs 3 A/V on rear panel Analog Inputs 6-channel input Analog Inputs tuner On-Screen Display Yes Multizone Capability No Auto Setup No Remote Control Eleven-device, programmable remote Shipping Weight (System, Accessories, Packing) 36.8lbs MSRP U.S. $599.95 each Audio Specifications # of Amplifier Channels 7 Continuous Average Power (FTC) per Channel (stereo mode) 50 Watts (2 channels driven), 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms Front L & R Channels 50 Watts (2 channels driven) @ <0.07% THD, 20Hz – 20kHz into 8 ohms Center Channel 50 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms Surround Channels 50 Watts (2 channels driven) @ <0.07% THD, 20Hz – 20kHz into 8 ohms Input Level/Impedance 200mV/47k ohms - Linear (High-Level) Signal-to-Noise Ratio 100dB (IHF-A) Surround System Adjacent Channel Separation: Dolby Pro Logic I and II 40dB Dolby Digital 55dB DTS 55dB Frequency Response 10Hz – 130kHz (+0/-3dB @ 1 watt) Transient Intermodulation Distortion (TIM) Unmeasurable Slew Rate 40V/µsec Dimensions Width 17-5/16 inch (440mm) Height 6-1/2 inch (165mm) Depth 15 inch (382mm) Weight 27.7lbs Dimensions: Carton Dimensions (W x H x D) 21-27/32 inch x 18-5/16 inch x 10-1/2 inch Video Specifications Television Format NTSC Input Level/Impedance 1V p-p/75 ohms Output Level/Impedance 1V/75 ohms Video Frequency Response: Composite and S-Video 10Hz – 8MHz (–3dB) Component Video 10Hz – 100MHz (–3dB) HDMI Switching Tuner Specifications Frequency Range AM... 520 – 1720kHz Frequency Range FM... 87.5 – 108.0MHz Signal-to-Noise Ratio AM... 45dB Usable Sensitivity FM... IHF 1.3µV/13.2dBf Signal-to-Noise Ratio FM... Mono/Stereo 70/68dB Usable Sensitivity AM... Loop 500µV Distortion AM... 1kHz, 50% Mod 0.8% Distortion FM... Mono/Stereo 0.2/0.3% Selectivity AM... ± 10kHz, 30dB Stereo Separation FM... 40dB @ 1kHz Selectivity FM... ± 400kHz, 70dB Image Rejection FM... 80dB IF Rejection FM... 90dB Amplifier Specifications Amplifier Power (RMS) 50 Watts (2 channels driven) @ 8 ohms (20Hz – 20kHz, <0.07% THD) High Instantaneous Current Capability (HCC) ± 25 Amps

Condition

Used (normal wear)