EV FRi-2082 full range loudspeakers pair Crown amp CTs600 Amplifier
$1,400
Last updated 13 days ago in Oak Lawn, IL
Condition: Used (normal wear)
Listed in categories: Electronics & Media - Audio & Speakers
Chat securely on the app
Sold by

Additional images
Description
EV loudspeakers and Crown Amplifier Electro-Voice FRi-2082 - Dual 8" Two-Way Full-Range Loudspeaker (White) Pair Highlights For Permanent Installations Under Balcony and On-Wall Locations Dual 8" Speakers 1" Titanium Compression Driver Tuned Enclosure 200W Power Handling Features The FRi-2082 from Electro-Voice is a two-way ceiling or wall mount speaker for fixed installations, with a 200-watt power handling capacity that is designed for use in larger club, sports, and recreational venues. The speaker has a compact, low profile design, and features dual 8" woofers and a 1" horn-loaded titanium compression driver, housed in a reinforced 13-ply plywood cabinet. The speaker comes with a mounting bracket for horizontal or vertical orientation. Full-range two-way installation P.A. speaker for large sports, recreational and club venues 200-watt power handling capacity Dual 8" woofers 1" titanium tweeter loaded into constant-directivity horn Symmetrical cross section facilitates both ceiling and wall mounting, with horizontal or vertical placement options Versatile 45º aiming angle for under-balcony, on-wall, and stage monitoring applications LF-optimized vented enclosure Low-profile slanted design Secure reinforced cabinet construction Two 3/8-16 threaded mounting/suspension points PA Speaker Configuration Passive 2-Way Total Power Capacity 200 W RMS 800 W Peak System Impedance 8 Ohms (Passive) Drivers HF Driver 1 x 1" / 25 mm Titanium Compression Driver LF Driver 2 x 8" / 20.3 cm Woofer Performance Frequency Range 45 Hz to 20 kHz -10 dB Frequency Response 70 Hz to 20 kHz -3 dB Maximum SPL 116 dB (Continuous) 122 dB (Peak) Coverage Angle 100° H x 100° V Speaker Sensitivity 93 dB SPL Connectivity Audio I/O 1 x Barrier Strip Signal Processing Crossover 2.8 kHz Physical Construction Material Plywood Dimensions 24.4 x 14 x 8.8" / 222 x 620 x 356 mm Weight 40.1 lb / 18.2 kg Packaging Info Package Weight 44.4 Box Dimensions (HxWxD) Crown CTs600 amp Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet™ and CobraNet™ allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution. Features High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis Crown Switching Power Supply for lighter weight Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200 Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· "FIT" (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels Comprehensive array of indicators provide accurate diagnostics Two-channel models are fully PIP2-compatible. Multi-channel models accept MC accessory modules. Specifications Channels 2 Sensitivity 1.4 V Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted) 105 dB THD (full rated power, 20 Hz - 20 kHz) < 0.1% Damping Factor (10 Hz to 100 Hz) <3000 Frequency Response (at 1W, 4/8 ohms) +/- 0.25 dB Crosstalk (below rated power) 20 Hz to 1 kHz > 80 dB Common Mode Rejection (20 Hz to 1 kHz) > 50 dB Maximum Input Level before Compression +20dBu Load Impedance 70V, 100V (2-16 Ohms) Voltage Gain (at maximum level settings) (8/4 ohm operation) 35:1 (31 dB) Power Draw at Idle (120VAC mains: standby mode) 24W Dimensions 3.5" x 19" x 14.25" Weight 22.8lbs Shipping Weight 27.7 lbs Selling as bundle will not separate that’s how it was connected. $1400 cash takes it Please don’t bother with trades offers
Take action
Item location map
Map is approximate to keep seller’s location private.
Related searches
- Bose
- Subwoofers
- Amplifiers
- Dj equipment
- Stereo system
- Klipsch
- Bose speakers
- Beats studio
- Audio speakers
- Marantz
- Stereo receiver
- Earbuds
- Polk audio
- Pro audio
- Sony headphones
- Pioneer receiver
- Onkyo