Pre-Owned Like New Snap On EEDM 504D Digital Multimeter

meet at BP station in Archdale Description ・ LCD Display - 4,000 count with 42segment bar graph ・ REC (Record Mode) - Store minimum and maximum readings over a measurement period ・ AC/DC一Manually select AC or DC measurement function ・ Continuity Buzzer and Diode Test一Toggle between continuity buzzer or diode test on Ohm function ・ RANGE - Manually select the appropriate range ・ LCD Display - 4,000 count with 42 segment bar graph ・ Continuity Buzzer and Diode Test - Toggle between continuity buzzer or diode test on ohm function ・ HIGH RESOLUTION DCmV RANGE - Additional 40 millivolt range with 0.01mV resolution for improved accuracy when performing low voltage measurements ・ ACV (AC Volts) - Measure the voltage of ABS wheel sensors ・ DCV (DC Volts) - Measure the voltage of circuits and sensors ・ Hz/Duty (Duty Cycle) - Measure in percent the ON time of sensors or other devices ・ REL (Relative Mode) - Factor out lead resistance for improved low ohm measurements or compare readings to a known standard. Can also be used for differential measurements ・ HOLD - Lock the reading on the display for hard to read locations for future reference ・ OHMS/RESISTANCE - Measure the resistance of spark plug wires, coils, sensors, and continuity of wiring ・ AC/DC Current Functions (Amps) - Measure the parasitic draw from the battery with ignition off ・ Hz (FREQUENCY) - Measure the frequency of sensors and signals ・ CAP (Capacitance) - Measure the capacitance of condensers or capacitors found in today's hybrid automobiles ・ TILT STAND - Is built into the instrument housing ・ SEPARATE FUSE/BATTERY COMPARTMENT - Is easily removed for battery/fuse replacement ・ Fuses are labeled with replacement number ・ Technical and Service Hot Line: {contact info removed} ・ Manually select AC or DC measurement function ・ AC/DC Current functions: measure the parasitic draw from the battery with ignition off