Millermatic 350P (Pulse) MIG Welder GMAW Miller Welder

Meticulously maintained and very low hours! Come test it out you will not be disappointed. Miller Millermatic 350P MIG Welder measuring 34" X 19" X 41" includes input voltage, Bernard Q-Gun with 15' leads and factory installed running gear/cylinder rack. Welder has adjustable crater feature that optimizes crater size for steel, stainless and aluminum applications. Crater time delay allows deactivation of crater feature for tack or small welds. Welder has extended contact tip to protect internal components from damage. Welding machine has backlit words and alpha numeric displays which offer easy reading. It has aluminum pulse hot start feature which provides more arc power to eliminate a cold start that is inherent with aluminum starts. Features Pulsed MIG advantage whether welding aluminum, steel or stainless steel, improving productivity by 30, 50 or 100% and saving tens of thousands of dollars are typical results when switching to pulsed MIG with the Millermatic 350P Aluminum pulse hot start automatically provides more arc Power to eliminate a "cold start" that is inherent with aluminum starts Sharp Arc optimizes the size and shape of the arc cone, bead width and appearance and puddle fluidity Line voltage compensation (LVC) line voltage compensation keeps output of the Power source constant regardless of fluctuation in input Power +/- 10% Aluminum welding package with push pull gun superior aluminum performance on material as low as 19 ga with one stock number you get the best aluminum welding package available For aluminum welding the optional XR Aluma Pro push pull gun provides the ability to utilize 12 in, rolls of aluminum for extended welding time and reduced labor time from changing 1 lb. rolls of aluminum wire Gun on demand Miller's gun on demand feature allows you to use either a standard MIG gun a 15/30A spool gun or any other push pull gun without flipping a switch, the machine senses which gun you are using when you pull the trigger The fan on demand cooling system only operates when needed, reducing Power consumption and keeping internal components cleaner Specifications Input Power: V Rated Output: 32 VDC 1 or 3 Phase 60 Hz Includes Bernard Q300 MIG Gun With 15' Leads Regulator and Hose 10' Power Cord Factory-Installed Running Gear/Cylinder Rack Applications. (Retail $8660) Built-in pulsed MIG programs • .035 and .045 inch (0.9 and 1.2 mm) for mild or stainless steel • .035 and .047 inch (0.9 and 1.2 mm) for 4000 and 5000 series aluminum • .045 inch (1.2 mm) for metal core All programmed information is stored for MIG, push-pull and spool guns, and is restored after each power up. Single- or three-phase input power with line voltage compensation for constant output even with fluctuations to the input power. Superior aluminum performance. Direct connection for optional XR™ push-pull guns or Spoolmatic® spool gun. With Gun-On-Demand™, simply pull the trigger for the gun to be used and you are ready to weld. Industrial four-roll wire drive system features two easy-to-set, scaled, tension adjustments and quick-change reversible drive rolls for .035- and .045-inch (0.9 and 1.2 mm) wire. Technical Specs Trade Name: Millermatic® 350P Input AC Voltage: 200V Feeder Information: Built In Output DC Amps (Max): 400 Process: Flux Cored (FCAW) Duty Cycle: 300 Amps at 32 Volt At 60% Duty Cycle Phase: 1 or 3 Phase Weight: 181 lb. Items Includes: Millermatic 350 dual cylinder rack (195299) Original single rack also included. (Retail $425) Miller XR-Aluma Pro Lite MIG gun 300948 is a 175-amp push pull gun designed to directly connect to your Miller machine to weld aluminum. Light gooseneck-style gun features rear trigger that allows access to hard-to-reach welds. (Retail $2,461.00 USD) Dual wire tension settings for 4000- or 5000 series aluminum to ensure the very best wire feeding performance and arc consistency. Less than 2lbs and 25-foot cable allows you to access hard to reach welds.

Condition

Used (normal wear)