Sony STR-DN1040 AV Receiver 7.1 4k

GREAT receiver used it for years and didn’t upgrade nationally because of how good it is. Ran a 5.1.2 for 5 years with it with Bowers towers, center, 2 subs, and surrounds. Mixes incredibly, audio tech they put into it works so well user friendly and comes with calibration tool. Earc capable (how I was running it) 165w In terms of inputs for various AV gear, it has a total of 8 HDMI (1 on front, 7 on rear), 2 optical, 1 digital coax, 4 stereo audio, 2 component and 2 composite video. All video inputs upconvert to HDMI, but only 1080p/24Hz HDMI signals upconvert to 4k. 4k passthrough is supported for native UHD content. Options for connecting a display consist of dual mirrored HDMI outputs, 1 composite and 1 component. All in all, there are plenty of inputs and outputs for most situations. While many manufacturers are scrapping legacy video support, it's nice to see Sony include it. The STR-DN1040 has a 7-channel amp rated at 165w 8 ohms/1kHz/0.9%THD with 1 channel driven. So, for those people who dig mono 1kHz pink noise, you are going to be rocking with this beast. Change that to 2 channels driven and a full bandwidth 20-20kHz load and it drops to 100wpc, a respectable amount of power if the amp can actually hit it. There are 7 binding posts on the rear of the unit, with one set assignable for surround back, bi-amp, front height, or front B duties. There are two RCA subwoofer outputs, but they are not independently controllable. https://offerup.com/redirect/?o=aHR0cHM6Ly93d3cuYXVkaW9ob2xpY3MuY29tL2F2LXJlY2VpdmVyLXJldmlld3Mvc29ueS1zdHItZG4xMDQwLXJlY2VpdmVyLXJldmlldw==

Condition

Used (normal wear)

Model

STR-DN1040

Brand

Sony