Welder And Plasma Cutter
$1,600
Last updated about 2 months ago in San Antonio, TX
Condition: Open Box (never used)
Listed in categories: Home & Garden - Tools & Machinery
Sold by
Additional images
Description
*****Update***** 1600 FOR BOTH! Cornwell welder and plasma cutter. 4 in 1 dual voltage welder. Asking 2600 for both. Everything is there except the bottles. Sold as a pair. This 120V and 230V machine has a unique user interface that utilizes an LCD screen and advanced software to preset and memorize previously set welding parameters. Capable of welding with solid wire (with shielding gas) or with flux core. The machine also has smooth DC stick capabilities and the ability to perform lift arc start DC TIG welding on steel and stainless steel material with the included TIG Torch. Also comes complete with a spool gun for aluminum welding and easier feeding of tough to feed MIG wire. MIG welds 5/16” steel in a single pass when operating on 230V power. Use the included 120V adapter cord to run this unit off 120V AC power with a single pass MIG welder capacity of 3/16”. Welds between 24 gauge and 5/16” steel in a single pass. Stick welds with electrode up to 5/32” with exceptionally smooth DC stick welding output. SPECIFICATIONS: Input Voltage: 120v @ 50/60Hz, 230V @ 50/60Hz Input Current: 20A Output Voltage: 69V DC Output Current: 30 - 240 (MIG), 80 - 200 (Stick) Duty-Cycle: 40% @ 90A (120V), 20% @ 200A (230V) Dimensions: 28.75”L x 12.6”W x 18.9”H Weight: 40 lbs. Plasma cutter Description:The Cornwell MMWP375DVI is a Dual Voltage, DC Inverter Plasma Cutter. The output can be adjusted from 15 to 40 Amps. This unit is designed to cut up to 3/8" steel at a travel speed of 10 inches per minute when operating on 230V AC power. Use the included adapter cord to run this unit off 120V AC power for a cutting capacity on steel of up to 1/8” at a travel speed of 10 inches per minute. It cuts all electrically conductive materials. See chart below. It cuts a narrow kerf that results in a smaller heat affected zone for reduced warping. The MMWP375DVI is lightweight (19.85 lbs.), compact, inverter design for greater portability. It has a pilot arc for easy starts and enables the user to cut fence or expanded metal. This unit has a built in air pressure adjustment and gauge, indicator lights for quick troubleshooting and thermal overload protection •Plasma Cutter •230V, 25A, 60 HZ Input Power Required •No Load Voltage 340V •15 - 40 Amp DC Output •35% Duty Cycle @ 40 A •Dimensions = 15” x 12” x 6” •Weight = 19.2 lbs.
Save, Report, and Share
Item location map
Related searches
- Tool box
- Compressor
- Pressure washer
- Welder
- Table saws
- Chainsaw
- Generator
- Ladder
- Snap on tools
- Saw
- Drill
- Power tools
- Motor
- Ladder rack
- Wrench
- Hammers
- Nailgun
- Freon
- Soldering iron