Quest Dual 205 Overhead Dehumidifier

Material

Metal

Type

Hanging Dehumidifiers

Brand

Quest

Achieve greater high-capacity moisture removal with the Quest Dual 205 Overhead Dehumidifier. This unit can remove up to 205 pints of moisture (AHAM) from large manufacturing plants, warehouses, indoor growing facilities, military storage areas, as well as greenhouses. If not properly maintained, excessive humidity can be the cause of costly issues that result in quality errors, safety risks, and delays--all detrimental to good business operation. With ducting options and an onboard dehumidistat, the Quest 205 can help you quickly establish and maintain desirable relative humidity levels. Onboard Dehumidistat With three pre-set humidity level options, the Quest 205 can be set to your optimal RH and will operate when needed to maintain that set-point. Dry: 20% to 30% RH Normal: 50% RH Humid: 80% to 90% RH When relative humidity rises above your set-point, the dehumidifier will automatically begin running, and will continue to operate until the humidity level drops 4% - 6% below your presets. Once this is achieved, the unit will cycle off. Ducting Options Ducting is not a problem with the Quest 205. Featuring dual exhausts, the dehumidifier can be fitted to suit your desired ducting needs. No Ducting (Recommended): No ducting allows for you to easily install your dehumidifier, set the desired preset, and allow it to perform as needed. Ducted Return & Supply: This set up allows for warm, humid air to be drawn through the inlet near the ceiling and return dry and warm air through the outlet exhausts. Remote Area & Ducted Supply: Draw hot, humid air from the same space as the dehumidifier, and duct dry, warmer air into the dehumidified space. This option works well for placing the unit in another space such as crawlspaces. Remote Area & Ducted Return Only: This option allows the unit to draw in air from the humid room, process the air, and release the dry, warm air into the space the unit occupies. Plug & Play and Overhead Installation The Quest 205 can easily be installed on the ground or floor without intricate wiring and ducting installation. If your floor-space is limited, you can install it overhead, near the ceiling, using Quest Hanging Brackets and chains. This type of installation allows the unit to more effectively process warm, moist air near the ceiling. Simply install the unit with Quest Hanging Brackets and chains for overhead mounting. When installing on the ground level, allow for 2.5” clearance between the bottom of the unit and the ground for gravity draining of condensate. Additional Features Dual Ducts: Dual ducts more efficiently draw in more moisture-laden air. Fan Only Runs Whens Dehumidifying: The fan only runs when the compressor is running and the unit is dehumidifying. Daisy Chain Option: Wire up to six of these models together for use in large warehouse spaces. All six will be running off the same sensor on the Quest DEH 3000 R, so all models must be in the same room. MERV 11: Uses a standard MERV 11 filter. Gravity Drain: Uses gravity to drain condensate to an outside source or acceptable indoor drain. Operation Temperature: Operates in temperatures between 56 – 95 degrees Fahrenheit. Auto Restart: During a power outage, the unit will automatically resume operation. Low Voltage Terminal: For easier wiring to an external control, the Quest dehumidifier comes with a low voltage terminal block. Summary Dehumidify high-humidity industrial and commercial spaces with the Quest Dual 205 Overhead Dehumidifier. Removing up to 205 pints of water, this unit features an onboard dehumidistat, low terminal voltage block, and ducting options. What Customers Love Dehumidistat: The onboard dehumidistat provides greater autonomy for users while the unit monitors and controls humidity levels. Overhead Installation: The overhead installation frees up extra floor space.