Hitachi CB75F bandsaw 2.8 HP 15A motor

Hitachi CB75F bandsaw in very good condition. It came with a 3” wide Stellite blade but the kerf was too wide for me and it was too hard to steer if the blade got off line so I bought the blade guide that takes narrower blades and primarily use a Highland Hardware 3/4” Wood Slicer blade for all cutting but it was designed to be a resaw blade which it does beautifully. On a properly dressed 11” wide board it can cut a 1/16” thick veneer that only requires light sanding to smooth. There is one on the saw that is almost new and will come with two extra blades. The plastic blade guides that came with the saw are terrible but the replacement guide assembly uses roller bearings a big reason the saw cuts so nicely now. The saw is heavy and my shop is in a daylight basement so you might want to bring help if you want to move it without dismantling. I’m 66 years old with a bad back so can’t be of much help aside from advice ; )