White 3 rail vinyl Fencing

Picture is from internet because I’m a dummy and didn’t take a picture before I dismantled. Mine may be a slightly different config. The brand is Royal Outdoor Products, Inc. This PVC/Vinyl fencing was installed by the previous owners of our house as a corral for mini horses. However, if you cut down the posts, this could easily be regular fencing (ie. non-animal related use). By the way, the previous owners just sunk the bottom couple of feet of the posts into the ground-no concrete. There are 13 total 5” x 5” x 7’ tall posts (with one of a few configurations - 10 are 180 degrees (ie- straight line/pass through) posts, 1 is a 90 degrees corner, 1 is a “T” configuration, and 2 are “end” posts). I also have one more post that’s been cut down about a foot. All have post caps. There are 24 total 5” x 14’4” rails and a few more that have been cut down. The configuration is that for every 14’4” span of rail you have one post on each end and one in the middle. There is 10.5” between bottom of one rail to the top of the one beneath. There is 38” from top of top rail to bottom of bottom rail. I damaged a few of the “barbs” on the rails (meant to keep the rail from slipping out of the post) when dismantling. But if the fencing is installed correctly it shouldn’t be an issue. Or you can use those as cut down pieces if you need to cut any down.