Delta Rockwell 37-220 Jointer

The Rockwell Delta 37-230 jointer is a 6" jointer with a 3/4 HP motor. It features a 115/230V dual voltage motor, suitable for use with a variety of wood thicknesses, and push blocks for safer operation. Key Features and Specs: Motor: 3/4 HP, 115/230V, single phase, ball bearing, capacitor start. Cutting Capacity: 6" (152mm) width, 1/2" (13mm) depth. Fence: Center-mounted fence. Cutterhead: Three-knife cutterhead. Safety Features: Cutterhead guard, push blocks. Stand: May be used with the 50-290 Open Steel Stand. Additional Notes: The motor is shipped wired for 115V. The jointer is typically recommended to be secured to the floor during operation. The cutterhead should revolve toward the front of the machine. When using the jointer with a bench, ensure there's nothing in line with the rear table that will interfere with long pieces. Adjust the infeed table to achieve the desired cutting depth, usually less than 1/16" for softwoods and 1/32" for hardwoods. Always use a hold down push block for stock less than 3" wide or less than 1/2" thick.