Akai AM-32 Integrated Amplifier

Akai AM-32 Two channel analog integrated amplifier Unit was cleaned inside and out. All electrolytic capacitors were replaced with new audio grade electrolytic and film capacitors. Removed, disassembled, cleaned, and lubed all potentiometers with deoxit products. Replaced speaker terminals with new 5 way binding posts. Reflowed countless old cracked/cold solder joints. While I admit I wasn’t expecting much, this unit in fact does sound really good. I can demo it for serious buyers if desired. Every input, output, knob, button, function, etc works without any issues. She should be good for another 20+ years and would be perfect if you’re getting into vinyl or a good two channel setup. Specs: Power output: 50w X 2 @ 8Ω Frequency response: 5Hz to 100kHz Total harmonic distortion: 0.005% Damping factor: 50 Input sensitivity: 0.2mV (MC), 2mV (MM), 150mV (line) S/N: 62dB (MC), 82dB (MM), 97dB (line) Output: 150mV (line) Speaker load impedance: 4Ω to 16Ω Dimensions: 16.7” x 6.15” x 14.85” Weight: 24.7lbs

Condition

Used (normal wear)

Features

Headphone jack

Signal Type

Analog

Model

AM-32

Brand

Akai