2 JBL SF25 With QSC PLX2402 And 25ft Cables

JBL SF25 Specs: System Type: 15 in. 2-way sound reinforcement speaker Frequency range (-10dB): 35Hz-16kHz Frequency Response (+/-3dB) 45Hz-12kHz Sensitivity (1w/1m): 100dB SPL Nominal Impedance: 4 ohms Power Capacity: 500 watts Peak Power Capacity: 2000 watts Maximum SPL: 133dB Nominal Dispersions: 90 x 50 degrees Crossover Frequency: 2kHz Dimensions (H x W x D): 43.25 x 18.25 x 17 in. Weight: 94 lbs. QSC PLX2402 Specs: Watts Stereo Mode (both channels driven) 8 ohms 20 Hz-20 kHz 0.03% THD 425W 4 ohms 20 Hz-20 kHz 0.05% THD 700W 2 ohms 1 kHz 1% THD 1200W Watts Bridge Mono Mode 16 ohms 20 Hz-20 kHz 0.01% THD: 850W 8 ohms 20 Hz-20 kHz 0.01% THD: 1500W 4 ohms 1 kHz 1% THD: 2400W Noise (20 Hz-20 kHz): <-1.8 dB Input Sensitivity @ 8 ohms: 1.5 Vrms Input Sensitivity @ 4 ohms: 1.3 Vrms Output Circuitry: 2-Step Power Requirements (1/8 power pink noise @ 4ohms): 8A Distortion (SMPTE-IM) Less than 0.01% Distortion (typical) 20 Hz-20 KHz (10 dB below rated power) 1.0 kHz and below full rated power: Less than 0.01% THD Frequency Response: 20 Hz-20 kHz, � 0.2 dB/8 Hz-50 kHz, +0, -3 dB Damping Factor: greater than 500 Input Impedance: 6 K ohms unbalanced, 12 K ohms balanced Input Clipping: 10 Vrms (+22dB) Cooling: Variable-speed fan, rear-to-front air flow Connectors: (each channel) Input: 3-pin XLR and 1/4 in. TRS balanced Output: Neutrik Speakon and touch-proof binding posts Amplifier Protection: Full short circuit, open circuit, thermal, ultrasonic, and protection Stable into reactive or mismatched loads. Load Protection On/off muting, DC-fault power supply shutdown Dimensions: 19 in. (48.3cm) rack mounting, 3.5 in. (8.9 cm) tall (2 rack spaces), 13.25 in. (33.7 cm) deep (from front mounting rails) Gain: 40x (32 dB) Weight: 21 lbs. (9.5 kg) net

Condition

Used (normal wear)

Model

SF25

Type

Professional DJ audio equipment

Brand

JBL