Variable speed pool pump motor V-Green 165

This is brand new in box. Never installed. Only took it out of the box to take pictures. Century (regal-beloit) V-green 165 variable speed pool pump motor. Just hook it up to your existing pump and timer and start seeing energy savings. This is by far the cheapest way to upgrade to a variable speed pump. I am using the exact same motor on my pool pump and it works fantastic. Only reason i am selling is that this is square flange and I needed round flange, so make sure your pump is square flange. To install, I just took the motor off my 2hp hayward and threw this on. Timer is the old dial kind. Make sure breakers are off. Seek electrician if you are inexperienced. My pool is 18000 gallons and this is plenty for my vacuum and aerator. Full blow actually sends my vacuum out of the water. Side note: you may need to upgrade you impeller to a 1.5 hp impeller if you are coming from a 1hp pump. I got mine on amazon for $20. Also new seal kits for $10 aren't a bad idea. Feel free to ask questions. You can buy this online for 400 plus shipping or just pick it up in person for 300. Full VS pump units run you 1200. Century ECM16SQU Features: Replacement Variable Speed Motor Built-in control panel to set speeds, timer, etc. TEFC Construction and UV/Rain-proof enclosure Compatible with third party pool automation systems Energy efficiency of 80% over standard single speed motors Motor can be set at any speed from 600 to 3450 rpm with three saved presets Reduced noise emissions from motor and meets FCC Part 15, Class B Manual override capabilities with no need to adjust programmed settings. Freeze protection Specifications: Horsepower: 1/2 to 1.65 Total Horsepower: 1.65 Speed: Variable speed from 600 to 3450 RPM Service Factor: 1.0 Volts: 208-230 Max Amps: 10.5-10.0 RPM: 600 to 3450 Frame: 56Y Flange: Square Flange Shaft: Threaded Series: V-Green