RIMS (RAYS ENGINEERING OEM) -FRONT 19X9 -REAR 19x10 TIRES (FIRESTONE FIREHAWK INDY 500) -REAR 275/35R19 100W -FRONT 245/40R19 98W FRONT SPACERS ARE 25MM -The front rims will be flush with the fenders. They will look really good. (only needed if the rims are going on a 350z. They will not fit without them. Rims will hit the suspension) WHEEL LOCKS AND LUGS -I have 2 wheel lock keys as well as the card with all the information needed to order a new one incase these 2 break or get lost - ALL THE LUGS ARE ACORN STYLE WITH THE WASHER. You cannot run aftermarket lugs with these rims you have to run the OEM lugs. If you choose not to use these lugs they will end up coming loose and there goes your car. I did a lot of research on this because I wanted to use aftermarket. The reason for selling is because I sold the car. There is nothing wrong with the rims. None of them are curbed. There are little nicks on them but most got filled when they were painted purple but you have to really get up on them to see. The tires are close to new with possibly 800miles on them if that. They are sticky when hot and do not have a lot of road noise like the low profile tires. If you have looked around for a set of these rims or even called a dealer you know that they are hard and expensive to find in the condition that I have posted. If you have any questions send a message.