2025 Food Truck 2 basket fryer, juice dispenser permanent registration Clean Title

Brand New Food Trailer 16x8x8 1. Steel storage compartment for chemical storage 2. NSF approved, 3-compartment sink with 14” x 10”x 14” compartments, 12” faucet, and two (12” x 12” = 144” square inches) drain boards sloped to drain. 3. 12” splashguard between hand sink and 3-compartment sink 4. Hand sink with 9” x 9” x 5” with 4” faucet 5. P-trap assembly 6. 4” drain valve 7. 4-Gallon water heater (on floor) 8. Demand Pump—1.34 gpm with check valve 9. 45-Gallon wastewater tank, sloped to drain at 1/2 inch per foot. 10. 30-Gallon steel potable water tank, food grade, corrosion resistant 11. Potable water fill—3/4” inlet valve with screw cap, check valve, water inlet is 2” above vent line 12. Vent line. Both the vent line exit and potable water fill inlet are in a stainless steel box with door. The vent line terminates downward. 13. 2 basket fryer 14. Sky lights with screens—16 mesh per inch. Sky lights can be opened for make-up air for hood. 15. Serve out windows (12” H x 18 W” with 16 mesh per inch self-closing screen doors 17. Steel table (24” W x 24” D x 36” H) 18. Steel enclosed generator compartment, completely sealed from interior of trailer. 19. Dry storage steel shelving unit 20. Overflow device located 2” below water inlet on tank 21. Type one high velocity hood assembly. Hood has a 6” overhang of grill and is made completely with steel. Base of hood to cooking surface is 3 feet. Hood uses vertically positioned hood baffles sloped to at least a 45 degree angle from horizontal. A grease collection tray and cup is used. Hood in accordance with latest edition of uniform mechanical code. 22. Outlet for vent line from waste tank. 23. Partition separating cabin and kitchen area. 24. juice dispenser 25. screen vent window