Crain No. 835 Heavy Duty Undercut Jamb Saw

Brand

Crain

Heavy Duty Undercut Saw No. 835 This powerful saw undercuts walls, door jambs, doors, inside corners and most toe spaces. The 61/2" diameter No. 836 Carbide Tipped Steel Blade can fully undercut most doors in place and when used with the No. 805 Masonry Blade, can also be used for undercutting hearths. Height of cut is easily adjustable from flush to 1" above the floor with 3/32" graduations. The large height adjuster base helps prevent tipping and assures accurate, level cutting. Has a dual angle depth gauge which allows undercutting at a ‘straight on’ or 45° angle. Depth gauge is graduated in 1/8" increments with a 15/8" maximum depth of cut. Saw has a 7' 14/2 cord and is double insulated for safety. Wide, cushioned cast aluminum handle that can be locked in three ‘full grip’ positions for better saw control Cutting height adjustment is done with two 3-arm knob screws and the setting can then be positively locked at the desired height by tightening two wing screws Dust port for a 11/4" vacuum hose is provided in the height adjuster base and accepts the No. 3-13-45-079-010 Step Adapter