Carvin b1000 bass amp head & Genz Benz bass cabinet

Great bass amp head and cabinet combo in amazing condition! Both are made in the U.S.A. and ready to play! $900 for both obo Specs from Carvin: - OUTPUT POWER: 8 Ohms: 325w, 4 Ohms: 600w, 2 Ohms: 900w (with 2 ohm switch) - OUTPUT MODE: high efficiency CLASS D technology - POWER SUPPLY: high frequency switching - FREQUENCY RESPONSE: +/- 1 dB 20 Hz - 20 kHz amplifier section - DAMPING FACTOR: >300 - PREAMP: 4 stage CLASS A - PREAMP TUBE: 12AX7 switchable in/out - INPUT IMPEDANCE: >200Kohms - ACTIVE/PASSIVE Input Jack: 10 dB gain switch - accommodates all basses - ACTIVE TONE CONTROLS: +/-12dB @ 40Hz, 100Hz, 400Hz, 800Hz, 2kHz, 6kHz - DI OUT: -50 to +4 dBu adjustable, DC isolated XLR output - EFFECTS LOOP: -10dBV, buffered - FS22 FOOTSWITCH: Controls Effects Loop on/off & MUTE on/off - SOFT START: gradually turns on the amp to prevent surges that can trip circuit breakers - PROTECTION: speakers, over current, under voltage and thermal - AC VOLTAGE: 90-250V, 50-60 Hz - Power Requirements: 200VA - DIMENSIONS: 14.0" wide x 9" deep x 3.15" high (with feet) - NET WEIGHT: 6.4 lbs net (2.9 kgs) - WARRANTY: 1 year parts and labor - MADE IN THE USA NEOX-212T FEATURES GNX 12300 Neodymium Loudspeaker Our custom designed 12" Neodymium cast frame Loudspeaker is rated at 300 watts RMS and utilizes a 2 1/2" aluminum edge-wound high temperature voice coil. The 7 oz Neodymium magnet assembly is encased in a large heat sink structure for exceptional cooling. The paper cone, spider and dust cap have been calibrated to deliver the low frequency support and mid range articulation that today’s bassist demand. Dual Edge Porting Integrated into the cabinet design is a unique "Dual Edge" porting system which places a shelf port in each corner of the baffle face, forming an "X" across the radiating surface of the enclosure for increased low frequency support and projection. BASS CABINET CROSSOVER All Genz Benz bass cabinets offer 1/4" and Speakon® connections, along with a variable tweeter level control for flexible connection options and additional tone shaping. • Parallel Inputs - Two 1/4" full range inputs are provided. Either one may be used for input from the bass amp. Use these two inputs when 'daisy-chaining' 2 cabinets together. • Full Range Speakon® Input - We recommend using this input with the appropriate cable when connecting to a high powered bass amp - 400 watts or more. • Tweeter Level Control - This controls the amount of signal to the tweeter. We recommend starting with the control at 50%. Then balance the tweeter output to the cabinet's speaker output in combination with your instrument's pick-up tone and amplifier clarity. DESCRIPTION This is the most popular cabinet in this series. Compact and light-weight this dual 12" design drives with the heart of a 4 x 10" enclosure. The coupling of the 2 Neodymium loudspeakers along with the X porting of the cabinet combine to project round, solid, explosive performance on any stage. Additionally, the vertical array of the 12" drivers enhance the vocal projection of the midrange which enforces ho w well in cuts through the mix. The lightweight design, "Edge-Lift" handles and tilt-back casters make traveling with this NEO a breeze.

Condition

Used (normal wear)