Includes recorder, case, Strap, tape, & ac battery. Is in excellent working condition. The TCD-D10 PROII is an improved model of the TCD-D10, with some distinctive features like backlit LCD level and function display, balanced inputs with XLR connector, improved converters and "absolute time" display. Despite it's high price, this portable DAT recorder was very popular largley due to it's features and reliability. Product Highlights Portable DAT recorder of extremely compact dimensions Easy-to-read LCD multi-function display Absolute time recording Balanced, switchable MIC/LINE inputs Built-in hours meter, microphone low-cut filter and microphone attenuator/limiter AES/EBU type digital I/0 High-speed search using the ID recorded in subcode area Built-in speaker AC/DC operation-AC 100 to 240V with ACP-88 AC adaptor Original suggested retail price was 4,750.00 US Dollars Features LCD Multi-Function Display The LCD display of the TCD-D10PRO mkII is not only accurate and informative but also back- illuminated for easy reading. Peak Level Meters The 20-segment digital peak level meters include overload indicators. They also demonstrate excellent traceability for accurate level indications. Tape Time/Clock Indications To make sure that you have enough tape left at the recording chance, the linear tape counter can be switched to display the remaining tape time. In playback, the date and time the tape was recorded can be displayed by pressing the RECORDED TIME button. Pressing the CLOCK button brings up the current time in the position of the tape counter. Battery Indicator The flexible display of the TCD-D10PRO mkII DAT Recorder even offers a 5-segment battery indicator. The last segment of the indicator blinks on and off to alert the operator to the impending need for battery replacement. An alarm sound is also heard approx. 5 minutes before the battery completely wears out and the tape is brought to a forced stop. Sampling Frequency Indication The sampling frequency in use is displayed. Caution Indicator Upon detection of erroneous conditions in the tape transport mechanism, the caution indicator flashes and error codes are displayed. 100X Search Up to 99 start Ids can be recorded in the subcode area to make it easy and quick to locate recorded programs. When the record button is pressed, the start ID is recorded automatically for 9 seconds. During recording, it can also be added manually to any position of the tape. Search done by reading these start IDs is performed in two modes at 100 times normal speed. In the SCAN mode, the first 12 seconds of program after each start ID are played automatically. In the SEARCH mode, any start ID can be located directly using the search key. If the FF or REW key is pressed during play, moreover, the playback speed is increased to approx. 3 times normal speed for cueing and reviewing. Pressing the FF or REW key a second time, together with the PLAY key, further increases the playback speed to approx. 16 times normal speed. RF End Search In the newly added RF end search mode of the TCD-D10PRO mkII, the tape is automatically stopped at the end of the recorded part when fast-forwarding the tape. High-Speed Spooling By virtue of DAT recording, the TCD-D10PRO mkII offers a maximum spooling time of 140 times normal speed. That is, the DT-120/P120R tape for 2 hours of recording can be rewound or fast- forwarded in a minute. Limiter/Mic attenuator To eliminate noise caused by unexpected peaks, the TCD-D10PROmkII incorporates a record-level limiter with a fast attack time of 300 us. The microphone attenuator prevents distortion by suppressing the signal level by 20 dB. Built-In Speaker In addition to headphone monitoring, immediate playback is possible through a built-in speaker. Despite the compact dimensions of the TCD-D10PRO mkII, the speaker is large in diameter and delivers a sufficient listening level. Remote Control A wired remote controller is supplied to control the record, play, stop and pause functions of the recorder easily at hand. With the use of the HOLD switch, operation of the function keys can be inhibited to safeguard against accidental pressing. The top end of the controller is designed to accept microphone holder. Two microphone stand screw adapters are also supplied. Hours Meter The hours meter located inside the battery compartment helps determine the correct timing for head replacement. Easy Servicing The internal structure of the TCD-D10PRO mkII perfectly eliminates unmethodical wiring. All electronics are divided into analog, system control, and signal processing/servo blocks and mounted separately on three boards to make troubleshooting as easy as possible. With connectors used for interconnection, the boards can be detached easily from each other for instant replacement. They can also be raised close to the upright position on the chassis to facilitate servicing. Professional Quality and Reliability The TCD-D10PRO mkII