QSC PLX3602 Amplifier EXCELLENT CONDITION

Price is FIRM Up for sale I have a QSC PLX3602 amplifier in great condition. Amp works perfectly and has no issues. Amp has just been cleaned of dust internally. Will come with original power cord. Features The QSC PLX3602 is a lightweight rackmount stereo power amplifier, offering up 775 Watts per side at 8 Ohms, and weighing in at a mere 21 lbs. The unit is equipped with built-in subwoofer processing, filter switches, and front panel indication of bridge mono status. The PLX3602 is a worthy and versatile solution for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or who require extremely high power bridge mono operation for specific applications. Lightweight, high-output stereo rackmount power amplifier 21-position front-panel gain controls for precise, repeatable amplifier adjustment Cooling design with front-exit hot air exhaust, Flow-through heat sinks require no filters, eliminating clogging Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection, stable into reactive or mismatched loads Fully selectable low frequency filtering with a choice of 30Hz or 50Hz roll-off QSC PLX3602 Power Rating Rating @ 1 kHz, THD=0.1% 1250W @ 4 Ohms Stereo (per channel) 775W @ 8 Ohms Stereo (per channel) 1800W @ 2 Ohms Stereo (per channel) 2600W @ 8 Ohms Bridged-Mono 3600W @ 4 Ohms Bridged-Mono Rating @ 20 Hz - 20 kHz, THD=0.05% 1100W @ 4 Ohms Stereo (per channel) 725W @ 8 Ohms Stereo (per channel) 2500W @ 8 Ohms Bridged-Mono Damping Factor >500 Input Sensitivity 1.25 Vrms @8 Ohms Input Impedance 20 kOhms, balanced 10 kOhms, unbalanced Gain 36dB (@8 Ohms) Frequency Response 20 Hz - 20 kHz, -0.5dB Signal-to-Noise Ratio -107dB (20 Hz - 20 kHz) Total Harmonic Distortion (THD) <0.02%, 20 Hz - 20 kHz Input Connections 2 x XLR female, balanced 2 x 1/4" TRS phone, balanced Output Connectors 2 x pair 5-way binding posts 2 x NL-4 Speakon Controls Front Panel 2 x rotary Level Control knobs 1 x Power switch Controls (Rear) 1 x Bridge/Stereo/Parallel Input Config. Switch 1 x Clip/Limiter 2 x Top 100 Hz HPF/Full/Sub 100 Hz LPF Filter switches 2 x 33 Hz HPF/Full (infrasonic) Filter switches Indicators 2 x Ch.1,2 red Clip LEDs 2 x Ch.1,2 green -10dB LEDs 2 x Ch.1,2 green -35dB signal LEDs 1 x blue Power LED 1 x amber Parallel LED 1 x amber Bridge Mono LED Cooling 1 x variable-speed fan (back-to-front airflow) Power Requirements 100, 120 or 220-240 VAC, 50- 60 Hz Dimensions 19 x 3.5 x 14.9" (483 x 89 x 379mm); 2U Weight 21 lbs (9.5 kg)