Saves you money and is the economical alternative to costly dent professionals. Package list: 1pcs tool bag 1pcs gold dent lifter 1pcs bridge puller 1pcs hot glue gun 1pcs rubber hammer 5pcs yellow glue sticks 1pcs tapdown set with 5 heads 5pcs blue puller tabs 12pcs black puller tabs 1pcs Small plastic shovel 1pcs dishcloth 1pcs Instructions *** 1.Clean damage surface with a clean wet cloth. 2.Put the glue stick to gun and connect the power source and preheat for 5-10 minutes. 3.Pull the trigger and apply the suitable drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue) 4. Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until sticks (Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter) 5. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent. 6. When dent was removal, clear the glue by alcohol with plastic shovel. 7. If dent still exists, knock it slightly with a flattening hammer with Tapdown head 8 Repeat the operation steps above until the dents are repaired.