Delta ShopMaster Model DP200 10" Bench Drill Press with a 1/4HP, 120V motor; tilting table, table raising mechanism, 1/2" capacity chuck, belt and pulleys, light   DELTA DIFFERENCE      Induction motor for long-lasting, smooth performance.      Pivoting motor mount maintains correct belt tension and facilitates speed changes.      Three-spoke pilot wheel for operator convenience.      Adjustable-position, locking depth stop for accurate depth measurement and repetitive drilling.      Tilting table with slots for fast clamping of work.      Standard 3-jaw, 1/2" capacity chuck for positive gripping of various drill press cutting tools. SPECIFICATIONS SPEED RANGE: 620-3100 SPINDLE AND CHUCK TAPER: Jacobs 33 QUILL: Diameter: 1 1/2"(38 mm) Stroke: 2 1/4"(57 mm) CAPACITIES: Chuck: 1/2"(13 mm) Chuck to table: 14 1/8"(359 mm) Chuck to base: 19"(483 mm) Max. dia. hole in steel: 3/8"(10 mm) Max. dia. hole in cast-iron: 1/2"(13 mm) OVERALL DIMENSIONS: 30"H X 11"W X 24"D (762 X 279 X 610 mm) WEIGHT: 70 lbs.(32 kg) QUILL TRAVEL: 2 3/8" STEP PULLEY OR VARIABLE SPEED: Step Pulley MOTOR: 1/4HP, 120V, single phase, 60 Hz., 1720 rpm MOTOR CONTROL: Toggle switch with lock out key SPINDLE SPEEDS: 5: 620, 1100, 1720, 2340, 3100 rpm TABLE: Tilting with C-clamp edge and diagonal slots 8 1/4" X 7 1/2"(210 X 191 mm) BASE: 8 1/4" X 7 1/2"(210 X 191 mm) COLUMN DIAMETER: 2 3/8"(60 mm) Drill Press has not been used. Chuck is still in grease $70, cash