Mig Torch 250 amp., 15’ long whip setup for a Lincoln Electric Welder - New. This is made by Trafimet, called an ERGOPLUS24. They are $150 at Eastwood and $200 at Everlast. I have the Lincoln Electric connector on this, but I also have the Eastwood connector shown on the last few pages, just tell me which one you need. I sold the machine I was going to use this on so don’t have a need for it anymore. I have many other welding supplies, see my other ads. Can be used with most Lincoln machines and some Miller Electric, Esab, Hobart, Weld Craft, Tweco, Everlast, AHP, Snap-On, Rhino, Titanium, Vulcan, Eastwood and other Mig Welder machines. Check your machine for size limitations & connection compatibility. NOTE: If you are looking to replace a Magnum 100 or 175, this is the perfect Mig Gun. The amperage rating on Mig guns is rated for straight CO2, if you are running a Mig mix ( most do) 75/25 argon/CO2 the amperage rating drops for all manufacturers accept Lincoln, but they are rated at the # on the gun. ie a Magnum 100 is only rated for 100amps, but is sold on every 140 and some 180 amp machines. This unit is rated at 250 amps or 220 on mixed gas. The last picture shows the connection point on a 180amp machine, because of the oversized plastic insulator, you will need to remove it, replace it or cut a larger hole in the plastic front cover for the best fit.