REESE RB WEIGHT DISTRIBUTION KIT W/SHANK, FRICTION SWAY CONTROL, 2-5/16" BALL, SWAY CONTROL BALL, CHAINS & HARDWARE, 10,000 LBS/1000 LBS- 49903
$300
Posted over 3 years ago in Litchfield, NH
Condition: Used (normal wear)
Listed in categories: Vehicles - Campers & RVs
Sold by
Additional images
Description
-Provides everything needed to improve towing, safety and performance right out of the box -Preinstalled and torqued sway control ball and 2-5/16" hitch ball, u-bolts and chains -Fabricated head and welded hitch bar Includes friction sway control and mounting hardware -Capacity: 10,000 lbs. -Tongue Weight: 1,000 lbs. -Tongue rating of trailer hitch must meet or exceed measured tongue weight of trailer. OEM hitches may not be rigid enough for tongue weight and may need to be replaced (too much flex and won’t carry load). -Raised balls usually have reduced load ratings. Ball rating MUST equal or exceed trailer GVWR. -The ball height should be greater the than coupler height by approximately 3/4 to 1” (measured in step 2) to compensate for vehicle squat. For vehicles with air springs, air shocks or an automatic leveling system, check vehicle owners manual. Unless otherwise specified, level the trailer with the vehicle loaded as it will be when towing before setting ball height and attaching trailer. **Retails for $426.27
Save, Report, and Share
Item location map
Related searches
- Trailers
- Travel trailers
- Camper
- Utility trailers
- Enclosed trailers
- Dump trailer
- Camper shells
- Pop up campers
- Hauler
- Camper van
- Motorhomes
- Camper trailers
- Motorcycle trailer
- Rv
- Camping tents
- Truck camper
- Teardrop camper
- Trailer jack