BRITAX BOOSTER CONVERTIBLE CAR SEAT 💺

Britax Grow With You ClickTight Plus Limits for Weight and Height Forward-facing: 25-90 pounds, and between 30 and 58″ in height. The seated shoulder height of the child can range between 12.5 and 20.5.” The top harness straps need to either be at or above your child’s shoulders, and the ears of the child must not extend above the headrest. Your child should be at least 2-years-old. Of course, research into car safety indicates children should remain rear-facing for as long as possible (the average is 4 years in Sweden, which posts the lowest child fatality rate on Earth), and after rear-facing, the child should remain forward-facing as long as possible. Also note that using a harness is required when using the seat in harnessed mode if the child weighs more than 65 pounds, although Britax recommends it in every installation. Booster mode: 40-120 pounds, and between 45 and 62″ in height. The seated shoulder height of the child can range between 15 and 23.” The shoulders of the child need to be at or below the shoulder belt positioner. Remember that children should remain in booster seats until their seat belts fit them over the shoulder, across the chest, and flat on the upper thighs, which is also known as the 5-step rule. Dimensions of the Britax Grow With You ClickTight Plus The seat is 22.5″ wide at its widest point, which is at the shoulders. The seat weighs 26.5 pounds. Inside, it is around 15.5″ wide at the widest upper portion at the shoulders and 12″ wide in the seat area. Using the Britax Grow With You ClickTight Plus The seat arrives in a box that’s designed very well; you don’t have to struggle to get the seat out of the box, which is nice when you consider that it has a decent amount of weight behind it. The seat essentially just slides out, which is where the fun begins. The installation of the seat is a dream. In fact, it’s my second favorite thing about the Pinnacle after its harness height range. What I’m talking about is the ClickTight seat belt installation system. It’s designed to allow you to make a safe installation through what is essentially an automatic belt tensioner. I love this! All you need to do is lift the cover so you see the ClickTight panel, route the belt through the green path as needed, and then close the cover. It only takes a few minutes in most vehicles, and from then on, all you need to do is attach your top tether strap to the appropriate tether anchor. Don’t worry about LATCH weight limits! Don’t worry about complex paths for routing the belt! Don’t worry about locking clips! It’s that easy in the majority of vehicles. This is a reason that, by itself, would make the Pinnacle worth considering. Besides this, the instructions are quite clear, the 5-point harness is designed to be very difficult to tangle, and the covers are easy to take off, which makes things easier for washing, since booster-aged children inevitably have spills and messes at one point or another.. Why Buy the Britax Grow With You ClickTight Plus? This is the meat and potatoes of this car seat. Along with the Frontier, the Pinnacle leads the car seat industry in the United States with its high top harness height setting of 20.5.”

Condition

Used (normal wear)