50ft heavy-duty 50A 125/250V (120/240-250V) temporary power cord (likely SO cord 8 AWG 4-conductor cable), commonly used for generators, RVs, temporar

50ft heavy-duty 50A 125/250V (120/240-250V) temporary power cord (likely SO cord 8 AWG 4-conductor cable), commonly used for generators, RVs, temporary power distribution, welders, or industrial tools. SO cable (service oil/water resistant, 8 AWG 4/C, rated 600V, suitable for 50A 125/250V) with industrial-grade connectors, including a Hubbell brand one (common on 50A locking or straight-blade plugs like NEMA 14-50 or Twist-Lock variants).0 Recommended Specs for a Long-Lasting 50ft 50A Temporary Cord (125/250V) • Cable: 8 AWG SOOW or STOW (4-conductor: 2 hots, neutral, ground). This matches the cable in your photo — excellent for durability, flexibility, and outdoor/temporary use. Avoid undersized wire (e.g., 10 AWG) for full 50A loads over 50ft. • Voltage/Amps: 50A at 125/250V (handles up to ~12,000–12,500W). This supports split-phase 120/240V systems. • Length: 50ft — standard and practical. • Connectors ◦ One end: Male plug (e.g., NEMA 14-50P or CS6365 Twist-Lock male). ◦ Other end: Female connector (e.g., NEMA 14-50R, CS6364 Twist-Lock female, or bare wires for hardwiring into a distribution box).9 • Features for longevity: Weather-resistant jacket, strain reliefs, proper grounding, and UL-listed components. Use twist-lock connectors where vibration or disconnection risk is high. ◦ 50ft of 8/3 + ground SOOW cable (or 6/3 + 8/1 for extra margin on longer runs). ◦ Matching male plug and female connector (e.g., Hubbell or equivalent 50A 125/250V rated). ◦ Cord grips/strain reliefs, heat-shrink tubing, electrical tape. 2 Wiring Configuration (standard 50A 4-wire 125/250V): ◦ Black (Hot 1) → X or L1 ◦ Red (Hot 2) → Y or L2 ◦ White (Neutral) → N or W ◦ Green or bare (Ground) → G 50ft 50A cords with Twist-Lock ends

Condition

Used (normal wear)