Lincoln spool gun MiG tig and stick welder

THIS IS A LOT TO READ BUT YOUR GETTING A LOT OF STUFF SO PLEASE READ THIS TO THE BOTTOM THEN ASK QUESTIONS. UP FOR SALE, A LINCOLN MIG TIG STICK WELDER . THIS WELDER IS A SINGLE PHASE 220 VOLT INPUT AND WOULD PLUG INTO A DRYER TYPE OUTLET. THE WELDER IS IN PERFECT WORKING CONDITION, AS WELL AS EVERYTHING THAT COMES WITH IT. THE POWER SOURCE IS SPOTTLESS IN THE INSIDE AND THE OUT SIDE HAS A FEW SMALL DINGS, AND SPOTS WHERE THE PAINT IS MISSING. I PAINTED THE TOP WITH RED RUSTOLEM PAINT AND IT ALMOST MATCHES THE SIDES. THE POWER SOURCE IS A LINCOLN DC-250. THE DC 250 IS HIGHLY SOUGHT AFTER FOR HOME SHOPS AND SMALL GARAGES. THE POWER SOURCE IS CC AND CV (CONSTANT CURRENT IS USED FOR DC TIG AND STICK WELDING ) (CV OR CONSTANT VOLTAGE IS USED FOR MIG WELDING) THE POWER SOURCE HAS SEVERAL SETTINGS FOR STRAIGHT POLARITY AND REVERSE POLARITY FOT STICK AND TIG WELDING, THE CV SIDE HAS SEVERAL SETTINGS THE CORSE VOLTAGE AS WELL AS A FINE VOLTAGE AJUSTMENT, THE CC SIDE ALSO HAS SEVERAL SETTINGS FOR COARSE SETTINGS AS WELL AS FINE AMPERAGE AJUSTMENT, THE POWER CORD IS ABOUT 10 FEET LONG IN PERFECT CONDITION WITH A NICE PLUG. THE POSITIVE STICK LEAD IS ABOUT 25 FEET LONG IN PERFECT CONDITION WITH A GOOD USED STINGER. THE NEGITIVE CABLE IS ABOUT 25 FEET LONG IN PERFECT CONDITION WITH A USED BUT PERFECT GROUND CLAMP. THE INTERCONNECTING CABE (CONNECTS THE FEEDER TO THE POWER SOURCE) IS IN PERFECT CONDITION AND IS ABOUT 30 FEET LONG. THE POWER CABLE FOR THE FEEDER IS IN PERFECT CONDITION AND ABOUT 10 FEET LONG. THE INERT GAS HOSE IS ABOUT 50 FEET LONG AND IS USED IN PERFECT CONDITION, THE REMOTE CONTROL CABLE IS ABOUT 30 FEET LONG IN PERFECT CONDITION THE REMOTE CONTROL BOX IS IN PERFECT WORKING CONDITION. THE WIRE FEEDER IS A LINCOLN MODEL LN-7 WHICH HAS BEEN MADE CONTINOUSLY FOR ABOUT 40 YEARS NOW AND THEY ALL USE THE SAME PARTS. THE LN-7 IS THE WORK HORSE FOR THE LINCOLN FLEET. THE WIRE FEEDER IS IN PERFECT WORKING CONDITION AND IS VERY CLEAN. THE WIRE FEEDER COMES WITH A LARGE SPOOL HOLDER THAT TAKES 50 POUND SPOOLS OF WIRE (YOU CAN PUT A LARGE ROLL OF WIRE ON THIS AND NEVER HAVE TO BUY A NEW ROLL FOR YOUR LIFETIME) THE MIG GUN IS A SUPER HEAVY DUTY MIG GUN RATED FOR 400 AMPS AND IS ABOUT 15 FEET LONG WITH A .035/.045 LINER AND USES ALL STANDARD CONSUMABLES. THE MIG GUN HAS A LINCOLN BACK END TO FIT RIGHT INTO THE WIRE FEEDER. THE MIG GUN ALSO COMES WITH A NEW TRIGGER WIRE AND A NEW SHORT INERT GAS HOSE FOR THE MIG GUN. THE TIG TORCH IS A AIR COOLED 200 AMP WELDCRAFT STYLE THAT IS A COMPLETE SET UP THE POWER HOSE IS A SOFT RUBBER AND 25 FEET LONG, THE POWER BLOCK IS A ALL BRASS POWER BLOCK THAT FITS THE TIG TORCH AND THE INERT GAS HOSE. THE TORCH COMES WITH TWO SET OF EACH 2 BACK CAPS, 2 CUPS, 2 COLLETS, AND 2 GAS DIFUSERS,THE TORCH COMES WITH A ZIPPERED NYLON COVER, AND A THIN SET OF TIG WELDING GLOVES IS INCLUDED. THE INERT GAS REGULATOR/FLOWMETER IS BRAND NEW AND ALL BRASS WITH A CGA-580 FITTING TO FOT ARGON OR ARGON/CO2 MIXED GAS. THE SPOOL GUN IS A USED LINCOLN WITH A 25 FEET LONG SET OF CABLES AS WELL AS THE INTERCONNECTING CABLES SO YOU WOULD BE ABLE TO WELD A ALUMINUM TRAILER 50 FEET LONG WITH THE POWER SOURCE SET IN THE MIDDLE OF A SHOP. THE SPOOL GUN AND CABLES ARE IN PERFECT CONDITION AND WORK PERFECTLY. ONCE AGAIN EVERYTHING IS INCLUDED WORKS PERFECTLY. I CAN SHIP THIS ANYWHERE IN THE WORLD AS LONG AS YOU PAY SHIPPING. I SELL LOTS OF WELDERS AND I AM REALLY GOOD AT WHAT I DO. IF YOU READ THIS DOWN TO HERE IM SURE YOUR SERIOUS SO PLEASE SEND ME YOUR PHONE NUMBER OR`CALL MINE. IF YOU SEND ME A TEXT I WILL JUST IGNORE YOU, TOO MANY TIRE KICKERS THAT DONT EVEN BOTHER TO READ WHAT IT SAYS HERE. I HAVE LOTS OF PHOTOS BUT CAN ONLY POST 15 HERE.

Condition

Used (normal wear)