2011 Ford Crown Vic. This is a standard P7 . Well maintained. It does have a check engine light on for the CAN bus fuse . The fuse is not blown. It is basically telling you that the voltage is to low to keep the pcm "alive". You could run a jumper wire directly to the battery if you wanted and that would get rid of the light. No problem starting or running at all. EVAP system WILL pass emissions as the purge vent and vent solenoid are both brand new and no holes in the vacuum lines and the cats and O2 sensors are only a couple years old. Needs a clock spring to automatically turn off the turn signals which is minor. Other than that it's a great car. Moving and no longer need a 3rd vehicle